LG PREMTC00U Owners & Installation Manual page 260

InSTALLATIOn & LAYOUT BEST PRACTICES
refrigerant Piping System Layout
Examples of Supports
figure 62: u-Bolt support with insulation.
Bolt
1.5t
Plate
Do not compress the insulation with the saddle-type support. If the insulation is compressed, it may tear open and allow condensation to
generate during product operation.
figure 65: u-Bolt support with an insulated Pipe.
To prevent
insulation from
pressing and
lagging, use a cover.
Sheathing
figure 67: one-Point Down-stop support (>441 lbs.).
Plate Nut
Hexagonal Nut
208 | DeSiGn & PracticeS
figure 63: o-Ring support with insulation.
Insulation
PVC
figure 66: o-Ring Band support with an insulated Pipe.
figure 68: two-Point Down-stop support.
O-ring Band
Welding
Insulated
Support Band
Down Stop
Due to our policy of continuous product innovation, some specifications may change without notification.
©LG Electronics U.S.A., Inc., Englewood Cliffs, NJ. All rights reserved. "LG" is a registered trademark of LG Corp.
figure 64: saddle-type support.
Bolt
PVC
O-Ring
Band
Lags
Sheathing
Welding
Insulated
Support Band
Refrigerant Pipe
MULTI
MULTI
Support at Intervals Between 5 and 6-3/4 Feet
F
F
MAX