Camera Control Menu; Camera Control Menu Overview; Preset Settings - LG LKD1000 Owner's Manual

Camera Control Menu

The Camera Control menu has several submenus.
All of these main menus are divided into submenus.

Camera Control menu overview

Main Menu
Set Preset
Go To Preset
Tour
Edit Group
PRESET Group Tour
Clear Preset
Clear All Preset
Set Alarm Input
Set Alarm Output
Set Auto Panning
AUTO PANNING
Run Auto Panning
Record Pattern
PATTERN
Play Pattern
Set Zone Area
PRIVACY ZONE
Display Zone Area
Protocol
Baudrate
Parity Bit
COMMUNICATION
Data Bit
Stop Bit
Sync Communication
Set Manual Focus
Speed
Go To PTZ Home
Position
CAMERA SETUP
Periodic PTZ Reset
PTZ Reset
Factory Reset
Notes:
• The pictures used in the camera control menu are
based on DVR-camera menu.
• Depending on protocol, some functions are not
activated. See page 33 for more details.

Preset Settings

Preset is the function to register camera monitoring
positions (pan, tilt and zoom positions) associated
with position numbers.
By entering the position numbers, you can set cam-
eras to the preset positions.
Sub Menu Page
Note:
17
To activate this function, you need to register the pre-
18
set positions of camera.
18
19
To register preset positions
20
21
1. Select the [PRESET] icon and press ENTER.
21
22
22
23
24
24
2. Select [Set Preset] option then press ENTER.
25
25
26
26
27
27
28
28
28
29
29
30
3. By moving the joystick, move the camera to a
30
4. Enter a [Preset No.] (0 to 127) you want to reg-
31
5. Enter a [Speed] (1 to 127) to move to the preset
6. Enter a [Park Time] (holding time) (1 to 255).
7. Repeat steps 3 to 6 to add additional position.
8. Press CLR to return to the previous menu.
The sub menu will appear.
The sub menu will appear.
point you want.
ister by pressing the numeric buttons then press
ENTER.
position. Then press ENTER.
Then press ENTER.
The position and its number are memorized for
later recall.
17