LG PREMTC00U Owners & Installation Manual page 264

InSTALLATIOn & LAYOUT BEST PRACTICES
refrigerant Piping System Layout
Multi F MAX Outdoor Unit System Piping Connections, continued.
1. align the center of the piping sections and tighten the flare nut by hand.
2. tighten the flare nut with a torque wrench, using the arrows on the wrench as a guide, until a click is heard.
3. Wrap insulation around the connection.
figure 77: Possible Branch Distribution unit to indoor unit connections.
1. 3/8 in. to 3/8 in. Connection
Ø3/8 in.
Flare side to
branch distribution unit
3. 1/2 in. to 5/8 in.
Connection Flare nut
Ø1/2 in.
Flare
side to
branch distribution unit
Torque
wrench
212 | DeSiGn & PracticeS
Flare side to indoor unit
Ø3/8 in.
Piping
Flare nut
Piping
Flare side to indoor unit
Ø5/8 in.
Connection socket
Spanner
Flare nut
Field Piping
Due to our policy of continuous product innovation, some specifications may change without notification.
©LG Electronics U.S.A., Inc., Englewood Cliffs, NJ. All rights reserved. "LG" is a registered trademark of LG Corp.
2. 3/8 in. to 1/2 in.
Flare nut
Connection
Connection socket
Ø3/8 in.
Flare
side to
branch distribution unit
4. 1/4 in. to 3/8
Flare nut
Connection
Connection socket
Ø1/4 in.
Flare
side to
branch distribution unit
F
MULTI
F
MULTI MAX
Piping
Flare side to indoor unit
Ø1/2 in.
Piping
Flare side to indoor unit
Ø3/8 in.