Heinner HWM-H9014INVTA+++ Instruction Manual page 9

www.heinner.com 9kg, 220-240V~50Hz
To ensure safety and reduce noise, you should install the transportation bolt cover supplied
with the unit (see the annex accompanying the unit). Lean and place the transportation
bolt into hole and press it following the shown direction until it clicks.
6. The transportation safety screws should be stored to be used in case of transportation.
NOTE: You should absolutely remove the transportation screws of your machine before the
first usage. Faults occurring in the machines operated with transportation screw fitted shall
be out of scope of warranty.
ADJUSTMENT
Do not install your machine on a carpet or such grounds that would prevent the ventilation
of its base. To ensure silent and vibration-free operation of your machine, it should be
deployed on a non-sliding and firm ground. You can adjust the balance of your machine
through the stays. Loosen the plastic adjustment locknut.
Lift the machine slightly and adjust the stays upward and downward by rotating them