Program Options; Program Start; Auxiliary Functions - Heinner HWM-H9014INVTA+++ Instruction Manual

www.heinner.com 9kg, 220-240V~50Hz

PROGRAM OPTIONS

1. PROGRAM START

After you have selected your options and placed detergent with in the detergent dispenser, turn
on the water tap and press the "Start/Pause" button. It also displays the remaining program
time.

2. AUXILIARY FUNCTIONS

Before starting the programme, you can optionally select an auxiliary function. At standby state,
press "Options" button to select additional function for current program. Select only one
function for each press, and then corresponding icon flashes. After starting up, program cannot
be changed.
PREWASH
Select the function to conduct pre-wash so as to enhance washing effects and better remove
stains. This function is suitable for heavy dirt clothes.
Before inflowing, laundry detergent/ washing powder can be added to pre-wash box, and
washing powder must be added to main wash box.
ETRA RINSE After set the function of rinsing adding, the program runs the rinsing process once
again before running the softening, and the total running time of the program increases
accordingly.
INTENSIVE - The function can be selected to prolong washing time, strengthen washing effects
and better remove stain.
3. DELAY END
Delay End function allows to run the machine at the consumers' convenience, for example, at
night when electricity is cheaper. Only under the standby mode, this button is valid for selecting
the reservation time.
• After the reservation function is selected, the time will increase 1h when each time the
reservation button is pressed. Before reservation, if the program time does not satisfy the
integral multiple of 1h, it shall be completed by pressing the reservation key for the first time,
and then the time increases 1h when each time the reservation button is pressed. If the
reservation is selected, before the program runs, the current reservation can be canceled by
turning the button to select other programs.
• The delay time must be longer than the wash program length as the delay time is the time
program will finish. For example: if the selected program time is 02:28, the delay time selected
must be between 03:00 and 24:00.
• When the reservation process is operated, the icon of 'reservation time' will be on. When the
reservation process is finished, the icon of 'reservation time' will be off, while the icon of the
'remaining time' will be on.