Generator Requirements - Miller Multimatic 220 Owner's Manual

2-4. Generator / Inverter Requirements
5-7.

Generator Requirements

Generator settings, if applicable
OM-281426 Page 22
�
Complete Parts List is available at www.MillerWelds.com
Engine Control Switch must be set
at "RUN" position - not "RUN/
IDLE".
Set generator Fine Adjustment
Control to 10 for maximum auxili-
ary power.
Minimum auxiliary power requirement at
rated load is 10 KW continuous/12.5 KW
peak at 240 volts AC for full output. Smaller
generators will reduce output capability.
OM-281426 Page 11