Page 2
Table of Contents 1.0 Overview ..................1 2.0 Symbols and Conventions .
Page 3
1.0 Overview The Labnet Vortex Mixer is a general purpose laboratory vortex mixer. Mixing speed is adjustable up to 3,400 rpm (3,200 rpm for 100V units and 2,800 rpm for 230V units). A three position switch allows the mixer to be operated continuously or by Touch activation. The heavy metal base and rubber feet prevent the unit from moving across the bench, even at maximum speed.
Page 4
5.1 Unpacking Upon receipt of the Labnet Vortex Mixer, examine the exterior carton for damages. In the event of shipping damage, a claim must be filed with the transportation carrier within 10 days of receipt. Save all packaging for inspection by the carrier.
Page 5
Products may not be available in all markets. Cat. No. Description S0200-20 Optional head, 3 inch, for processing larger numbers of tubes S0200-21 Optional head for 24 x 1.5/2.0 mL tubes, 24 x 0.5 mL tubes, and 32 x 0.2 mL tubes (or 4 tube strips) S0200-22 Optional head for 1 microplate or 64 x 0.2 mL tubes or 8 x 0.2 mL tube strips...
Page 6
(WEEE), this product is marked with the crossed-out wheeled bin and must not be disposed of with domestic waste. Consequently, the buyer shall follow the instructions for reuse and recycling of waste electronic and electrical equipment (WEEE) provided with the products and available at www.corning.com/weee. LABNET VORTEX MIXER...
Page 7
To request certificates, please contact us at www.labnetlink.com. Warranty/Disclaimer: Unless otherwise specified, all products are for research use or general laboratory use only.* Not intended for use in diagnostic or therapeutic procedures. Not for use in humans. These products are not intended to mitigate the presence of microorganisms on surfaces or in the environment, where such organisms can be deleterious to humans or the environment.
Need help?
Do you have a question about the S0200 and is the answer not in the manual?
Questions and answers