Figure 4: Light Pipe; Figure 5: Mounting The Fpt-Dact Board - Bosch FPT-DACT Operations & Installation Manual

FPT-DACT | Operation & Installation Guide | 2.0 Installation
4. Slide the light pipe over the end of the PCB so that they align with the LED (see Figure 4).

Figure 4: Light Pipe

5. Mount the FPT-DACT board in its enclosure using the mounting screws and mounting clips provided. Then
attach the ground wire (see Figure 5).

Figure 5: Mounting the FPT-DACT Board

1 - FPT-DACT installed in enclosure
2 - Connect ground wire to earth ground terminal on the FACP
3 - Support post assembly
1/05 | F01U002505B
1
SYS TROUBLE
NC C NO
1 2 3 4 5 KEYPAD
+ + - - A B
LINE 1
LINE 2
HEARTBEAT
2
8
4 - Lance
5 - Enclosure
6 - Mounting clip
3
9 4
5
6
7
7 - Ground wire lug
8 - Screw
9 - FPT-DACT PCB
EN | 10