QSFPTEK S5300-24T4X Quick Start Manual page 4

Installation Requirements
Tools Preparation
Screwdriver

Static-proof wristband

Bolt

Ethernet cable

Other Ethernet terminal devices

Control terminal

Safety Principles
Keep dustless and clean during or after the installation.
Put the cover in a safe place.

Put tools in the right place where they are not easily falling down.

Put on relatively tight clothes, fasten the tie or scarf well and roll up the sleeve, avoiding

stumbling the machine box.
Put on protective glasses if the environment may cause damage to your eyes.

Avoid incorrect operations that may cause damage to humans or devices.

Site Environment
Make sure that the workshop is well-ventilated, the heat of electrical devices is well-

discharged
Avoid damaging devices by following the electrostatic discharge prevention procedure.

S5300-24T4X Hardware Installation Manual

Put the machine box in a place where cool air can blow off the heat inside the machine box.

Make sure the machine box is sealed.

Mounting the Switch
www.qsfptek.com V2.0
0
4 / 10