Related Manuals for QSFPTEK S5300-48M6X
Summary of Contents for QSFPTEK S5300-48M6X
- Page 1 S5300-48M6X Quick Start Guide V2.0 48-Port Gigabit Ethernet L3 Switch 24x 1G RJ45 Ports, 24x 1G SFP Ports, with 6x 10G SFP+ Uplinks, Support Stacking www.qsfptek.com V2.0 1 / 11...
- Page 2 Introduction The S5300-48M6X is a managed access Ethernet L3 switch with 24x GE RJ45, 24x GE SFP downlink, and 6x 10GE SFP+ uplinks. It can be effortlessly control and manage the switch through both CLI and WEB interfaces. The S5300-48M6X layer 3 managed switch is an excellent choice for enterprise network requirements, campus networks, and SMBs.
-
Page 3: Hardware Overview
1G copper port link. (Port 25-48) SFP+ 10G fiber port link. (Port TE1-TE6) If the SYS indicator flickers, the SYS LED system works normally. If the PWR indicator is always on, PWR LED the device is powered on. www.qsfptek.com V2.0 3 / 11... -
Page 4: Installation Requirements
Put on protective glasses if the environment may cause damage to your eyes. Avoid incorrect operations that may cause damage to humans or devices. Site Environment Make sure that the workshop is well-ventilated, the heat of electrical devices is well- www.qsfptek.com V2.0 4 / 11... - Page 5 Avoid damaging devices by following the electrostatic discharge prevention procedure. S5300-48M6X Hardware Installation Manual Put the machine box in a place where cool air can blow off the heat inside the machine box. Make sure the machine box is sealed.
- Page 6 Connect one end of the Ethernet cable to the RJ45 port on networking equipment, such as PC, printer, server, storage, etc. Connect the other end of the Ethernet cable to the switch RJ45 port. www.qsfptek.com V2.0 6 / 11...
- Page 7 Insert the SFP+ module into the SFP+ port. Plug a fiber patch cable into the SFP+ transceiver. Connect the other end of the fiber to the device that you want to realize data communication. www.qsfptek.com V2.0 7 / 11...
-
Page 8: Connecting The Management Ports
Connect the DB9 female connector on the other end of the console cable to the serial port on the computer host. Configuring the Switch Configuring the Switch Using the Web-based Interface Step 1: Connect your computer to the switch using an Ethernet cable and open a web browser. www.qsfptek.com V2.0 8 / 11... - Page 9 255.255.255.0. Step 3: Open a web browser and type http://192.168.0.2 in the address bar. Enter the default username and password (admin/admin). Step 4: Click sign-in to access the web-based configuration page. www.qsfptek.com V2.0 9 / 11...
-
Page 10: Troubleshooting
Faults Relative to Power and Cooling System Do the following checkups to help remove the fault: 1. When the power on-off is at the “ON” location, check whether the fan works normally. If the fan www.qsfptek.com V2.0 10 / 11... -
Page 11: Support And Other Resources
Product Warranty S5300 series switches are backed by a 5-year limited warranty supported by QSFPTEK. You are eligible to apply for a return within 14 days and exchange within 90 days of receiving them. For more details about applying qualifications, please live chat or email sales@qsfptek.com...
Need help?
Do you have a question about the S5300-48M6X and is the answer not in the manual?
Questions and answers