Connecting Up - TAD -C1000 Owner's Manual

Connecting up

CAUTION
' Do not turn on the power to the unit or the other components until all connections have been completed.
' When connecting components or changing connections, always set the power to OFF and disconnect the power cord from
its AC outlet. When making connections, connect the power cord last.
1. Connect other components.
For information on how to connect other components, consult the operating instructions for the various components you
wish to connect.
2. Connect the supplied power cord to the unit's AC IN connector.
3. Connect the power cord to a standard electrical outlet (USA: AC 120 V; Europe: AC 220 V - 240 V).
LINE 1
R
OUTPUT
(BALANCED)
USB
R L R L
BALANCED UNBALANCED
2
CD player or other
audio component
The accompanying illustration depicts the use of balanced cables. For devices with balanced and unbalanced terminals,
connect in one of the two ways available.
When connecting to input connectors 5, or 6, and output connectors 3, or 4, use commercially available RCA cables and
plugs.
14
R
LINE 1 LINE 2 LINE 3 LINE 4
LINE 2 LINE 3 LINE 4 LINE 5 LINE 6
バランスコー ド
（市販）
L R
OUTPUT
(BALANCED) (BALANCED)
AC IN
XLR COAXIAL OPT 12 V XLR COAXIAL
D1 D2 D3 D4 TRIGGER
DIGITAL INPUT OUT
Two monaural power amplifiers,
or stereo power amplifier
L
LINE 4 LINE 3 LINE 2 LINE 1
MASTER SLAVE
OUT IN
1 2
LINE 6 LINE 5 LINE 4 LINE 3 LINE 2 LINE 1
バランスコー ド
（市販）
L
INPUT
INPUT
(BALANCED)
Power cord
(supplied)
AC IN
To AC
Power outlet