Remote Control Unit - TAD -C1000 Owner's Manual

Remote control unit

2
3
Remote control operating range
When using the remote control unit to operate the unit, point the remote control at the
main unit's remote sensor within the ranges shown in the accompanying illustration.
' The remote control may not operate properly if obstructions exist between the
remote control unit and the remote sensor, or if the angle between the remote
control and the remote sensor is poor.
' Malfunctions may occur if the unit is used nearby other appliances that emit
infrared light, or if remote control units for other devices utilizing infrared light are
used nearby. Alternately, using this remote control unit near other appliances that also utilize infrared light may cause
those appliances to malfunction.
' Replace the batteries when you notice a reduction in the operating range of the remote control unit.
' The remote control may not operate correctly if strong sunlight or light from fluorescent lamps is allowed to strike the
remote sensor directly. In such cases, change the installation location, or remove the fluorescent lamps to a more
distant location.
12
1 SACD/CD player control buttons
Can operate TAD SACD/CD players.
2 AMP  button
Use to switch the main unit's power state between ON
and Standby modes.
3 INPUT buttons
Select input source.
1
4 DISP button
Press to switch amplifier display ON/OFF.
5 VOLUME (+/−) buttons
Press + button to raise sound volume, and – button to
lower volume.
6 MUTE button
Press to turn off sound.
7 D/A converter control button
4
Can operate TAD's D/A converters.
5
6
7
LINE2 LINE3
LINE1
LINE6 LINE5 LINE4
Remote sensor
Remote
control unit
30°
30°
7 m (23 ft.)