Main Unit Rear Panel - TAD -C1000 Owner's Manual

Main unit rear panel

Balanced output connectors
(equivalent to XLR-3-32)
1 : Ground
2 : Hot
3 : Cold
Balanced input connectors
(equivalent to XLR-3-31)
1 : Ground
2 : Hot
3 : Cold
1 OUTPUT connectors (R/L)
Depending on the type of connectors on your power
amplifier, you can select either balanced (XLR-3-32) or
unbalanced (RCA pin jack) connectors.
2 INPUT connectors (R/L)
In accordance with the type of connector on the device
used, you may select either balanced (XLR-3-31) or
unbalanced (RCA pin jack).
3 MASTER OUT connectors
For details, see page 17 "Linking multiple Pre-Amplifiers".
4 SLAVE IN connectors
For details, see page 17 "Linking multiple Pre-Amplifiers".
5 AC IN connector
Attach the accessory power cord here.
TAD-C1000
11