Names Of Parts And Their Functions; Main Unit Front Panel - TAD -C1000 Owner's Manual

NAMES OF PARTS AND THEIR FUNCTIONS

Main unit front panel

2
1
1  Power button
Use to switch between ON and Standby modes.
2 Power indicator
Indicates Power status.
Lighted orange: ON (unit can be operated).
Off: Standby (indicates power cord is connected and unit
is in standby mode).
3 INPUT button
Select input source.
LINE1 LINE2
LINE6 LINE5
4 FINE button
Use to change the sound volume adjustment in
increments of 1 or 0.5 step.
5 MUTE button
Press to temporarily mute the audio playback.
6 Display
The display provides graphic information about the unit's
many operations and functions.
10
6
3 4 5
LINE3
LINE4
7
8
7 VOLUME dial
Adjusts the sound volume.
Rotate clockwise to raise the volume; rotate
counterclockwise to lower the volume.
8 Remote control sensor
Point remote control unit at this sensor to operate.
Effective distance is within about 7 meters (23 ft.).
9 DISP button
When pressed, the display status alternates between
Lighted (normal status)  Not lighted (off)  Lighted
(normal status).
Whenever power is switched ON, the display appears with
the status last selected before the power was turned off.
10 MENU button
Use to select the setting menu. When the button is
pressed, the setting mode changes.
11 EXIT button
Press to confirm selected settings.
12 < / > button
Press to select setting values.
CAUTION
You must unplug the power cord (disconnect device) to
stop the power supply completely. Please locate the unit
near the electrical outlet so that you can easily access
the power plug (disconnect device).
9 10 11 12