Table of Contents
Advertisement
6-2 Setting the RX-966KB Handheld transmitter /
PT-966B Body-Pack transmitter
1. Turn on / off the power
(1) Handheld transmitter
A. To turn on:Press the Power switch
B. To turn off: Keep pressing down the Power switch and the power is off about 3 seconds later.
(2) Body-Pack transmitter
A. To turn on: Switch the power switch to on.
B. To turn off: Switch the power switch to off.
3"
Power Switch
Figure 7
2. Adjusting frequency
# When setting the frequency as desired, make settings as 2-1 and 2-2.
2-1 When frequency is displayed on screen
(1) Press down SET key
for 2 seconds.
28
(2) With the 3 digits on the left of the LCD blinking (Fig.8), press ▲ or ▼keys to change the fre-
quency at an increment of "+/-" 1MHz (keeping the ▲ or ▼keys pressed down makes the num-
ber change faster). Press SET key to set, and the 3 digits on the right of the LCD blinking (Fig.9);
press ▲ or ▼keys to change the frequency at an increment of "+/-" 0.025MHz (keeping the ▲
or ▼keys pressed down makes the number change faster). Press SET key to save the set value.
When these blink, adjust by +/- 1 MHz
MHZ
Figure 8
17
to turn on the power of the transmitter.
25
Power Switch
When these blink, adjust by +/- 0.025 MHz
MHZ
Figure 9
2-2 When setting your desired frequency while a preset channel is displayed on screen:
(1) Press down SET key
for 2 seconds.
28
(2) The 3 digits on the left of the LCD begin to blink; press SET key twice to display the frequency
on LCD (Fig.10), now adjust the frequency by the same step of "2-1 When frequency is displayed
on screen – Point (2)".
When the preset channel lamp
blinks, press the SET key
twice to display the frequency
MHZ
Figure 10
18
Advertisement
Table of Contents
