Table of Contents
Advertisement
4.2
Installing the temperature and humidity sensor
Dimensions of
temperature
sensor,
humidity sensor
as well as the
combined tem-
perature and
humidity sensor
Figure 2: Dimensions of the sensors
4.2.1
Temperature sensor
The following temperature sensor variants are available:
◼
◼
◼
Installation instructions
Note!
An installation of a humidity sensor with humidity control is necessary
only for the bathing option "Sauna with humidity ". If a time controlled
humidity control is provided then a humidity sensor is not necessary.
Note!
The sensor of the thermostat must be installed in such a way that it is
not affected by the cool incoming air.
Note!
The temperature and humidity values displayed on additional thermom-
eters and hygrometers in the cabin can deviate from the displayed val-
ues on the control. This could be due to the following reasons:
Depending on the cabin, the temperature differences from the floor to
the ceiling or from the oven to the opposite wall can be up to 60 K and
the differences in the relative humidity can be up to 40%. Instruments
with indicator needles react slower than electrical measuring and dis-
play systems used for the control.
Oven sensor for temperature (FCU-SENSOR-OVEN-A)
Bench sensor for temperature (FCU-SENSOR-BENCH-A)
Combined bench sensor for temperature and humidity
(FCU-SENSOR-HUMIDITY-BENCH-A)
Installation
13
Advertisement
Table of Contents
