Goods Receipt, Transport And Storage; Safety; Goods Receipt; Packing - Fasel Elektronik FNT2000 Series Installation Instructions Manual

Goods receipt, Transport and Storage

3
3.1

Safety

Inappropriate
Transport
3.2

Goods receipt

After receipt, the consignment should be immediately checked for any transport damag-
es.
In case of damages, which are visible from outside, the following course of action should
be taken:
◼
◼
◼
3.3

Packing

3.4

Storage

Store the control device under the following conditions:
◼
◼
◼
◼
◼
◼
Installation instructions
ATTENTION!
Damage to the control due to inappropriate transport
The control is a highly sensitive electronic device. It can get damaged
due to inappropriate transport.
Therefore:
– Remove the packing only just before starting the installation
The consignment should not be accepted or accepted conditionally only.
Note down the scope of damage on the transport documents or on the delivery note
of the transporter.
Initiate claim.
NOTE!
Claim damages as soon as they are identified. Claims for damages can
be lodged only within the valid claim period.
The packaging should provide protection against transport damages to the individual
components till the time of installation. Therefore remove the packaging only just be-
fore installation.
Do not store in open place, store in a dry dust free place.
Avoid contact with any aggressive media.
Protect against sunlight.
Avoid mechanical shocks.
Storage temperature: –10 to +60 °C
Relative humidity: max. 80 %, non-condensing
Goods receipt, Transport and Storage
11