Table of Contents
Advertisement
8. Tighten four #8 x 3/4" Screws (2) into the left and
right handrail assemblies (E, G) and into the Left
and Right Uprights (89, 90).
9. Set the Console Base (64) facedown on a soft
surface to avoid scratching the Console Base. If
there are ties (H) securing the Crossbar (93) to
the Console Base, remove the ties.
Next, remove and discard the two indicated
screws (I). Then, remove the Crossbar (93).
Then, remove and save the four 5/16" x 3/4"
Screws (4).
8
E
2
89
9
4
I
H
93
12
2
G
90
64
I
4
H
Advertisement
Table of Contents
