Table of Contents
Advertisement
ProSAFE 8-Port and 16-Port Gigabit Web Managed Click Switch
6.
Select the Enable radio button.
A message displays asking if you want to delete the previous VLAN settings.
7.
Click the Yes button.
8.
For each port to be configured, enter the VLAN group ID number in the range of 1–409344
or enter all.
9.
Click the Apply button.
Your settings are saved.
Use the ProSAFE Plus Utility to Create a Basic 802.1Q-Based
VLAN
To create a basic 802.1Q-based VLAN:
1.
Connect your computer to the same network as the switch.
You can use a WiFi or wired network connection, or connect directly to a switch that is
off-network using an Ethernet cable.
2.
Double-click the ProSAFE Plus Utility icon.
The configuration home page displays a list of Web Managed switches that it discovers
on the local network.
3.
Select the switch.
If you do not see the switch, click the REFRESH button.
4.
Click the APPLY button.
You are asked to enter the password for the switch.
5.
Enter the switch's password in the password field.
The switch's default password is password.
The Switch Status page displays.
6.
Select VLAN > 802.1Q.
The Basic 802.1Q VLAN page displays.
7.
Select the Enable radio button.
A message displays asking if you want to delete the previous VLAN settings.
8.
Click the Yes button.
The switch ports display.
9.
For each port to be configured, enter the VLAN group ID number in the range of 1–4093 or
enter all in the field below the port.
10.
Click the APPLY button.
Your settings are saved.
Use VLANS for Traffic Segmentation
46
Advertisement
Table of Contents
