Table of Contents
Advertisement
ProSAFE 8-Port and 16-Port Gigabit Web Managed Click Switch
3.
Use either a vertical rear mount or a vertical side mount for the switch.
Vertical rear mount
Table Leg Mount
To table-mount the switch:
1.
Peel the plastic cover off the adhesive squares on the rear of the backplate.
The adhesive helps hold the backplate in place when you are mounting the switch.
2.
Mount the backplate on a table leg using the cable retention straps.
3.
Use a horizontal side mount for the switch.
b
OR
a
Vertical side mount
Hardware Setup
b
a
9
Advertisement
Table of Contents
