Recycling Information; Common Errors - Orbit STARLITE SL7 Owner's Manual

• CLEANING: Don't use soap, detergent or abrasive products. A damp cloth is
enough.
• LEVELING: If your unit is provided with leveling wheels, please adjust them in
order to avoid vibrations and therefore malfunctions.
•
KEEP THESE MAINTENANCE ADVISES FOR FUTURE REFERENCES
VII. RECYCLING INFORMATION
This electronic product must not be disposed of in municipal waste. To preserve the environment, this product
must be recycled after its useful life as required by law.
VIII. COMMON ERRORS:
ERROR CODE
NO DISPLAY
NOT DISPLAYING
ALL
INFORMATION
NOT RUNNING
SMOOTHLY
- - -
E01
REASON
A) Electricity not connected
B) Power switch not turn on
C) PCB no power or broken
D) Signal wire not connected
E) Computer broken
F) Background light broken
A) Display drive IC not
inserted well
B) EMI gasket slip, not well
fastened
A) Driving position
resistance
B) Running belt too tight or
too loose
C) PCB torque too big or too
small
A) Safety key off
No signal
HOW TO SOLVE
Connect the electricity
Turn on power switch
Press over-load protector or
change new PCB
Re-connect signal wire or
change new one
Change new computer
Check background light wire or
change new one
Re-insert IC, and re-weld it or
change new one
Re-assemble screen
has Adjust driving position, or add
some silicon oil
Adjust the belt tension
Adjust torque to right position
Put on safety key
Re-connect signal wire
Change new signal wire
Change new computer
Change new PCB