Troubleshooting - Dietz TAiMA VENTUM User Manual

34 7 CARE AND MAINTENANCE
What to check
Visual inspection:
Loose parts, fractures,
corrosion or other
damage
Entire product:
Check for
contamination

7.3 TROUBLESHOOTING

What
The product does not
move in a straight line.
The product is difficult to
push.
The brake function is
insufficient or uneven.
The seat cover is not taut
or not firmly connected to
the rollator.
DIETZ GmbH // Rollator user manual / TAiMA VENTUM // Version 1.0 EN
Description
If this type of damage is detected, the rollator must
no longer be used, as safe operation is no
longer guaranteed!
The entire rollator must be cleaned depending on how dirty it is, but at
least once a month (see section "Cleaning").
Possible causes
•
The wheel bearings are defective or
the wheel suspensions are no
longer correctly attached.
•
The wheel axles/wheel hubs are
dirty.
•
The brakes are set incorrectly.
•
The wheel bearings are defective or
the wheel suspensions are no
longer correctly attached.
•
The brakes are incorrectly adjusted
or the brake pad has worn out.
•
The rollator is not fully unfolded.
•
The seat cover is not correctly fixed
in the side rails or is defective.
•
The cross brace or folding
mechanism are defective.
Monthly
Before use
Measures
Consult your medical supply specialist
Remove the dirt
Consult your medical supply specialist
Consult your medical supply specialist
Fully unfold the rollator and engage
the folding lock.
Consult your medical supply specialist
x
x