Page 1
TSU-2 / TSU-4 Universal commode chair User manual Version 2.0.0...
Page 2
Record of product identification data We recommend that you write down your product identification data below (found on product label), so that you have them on hand should you require any further information about your product (see chapter "Product labelling"). Type / model Item No.
Page 3
You will always find the latest information about your product on our website. For information or queries concerning product safety and on recalls, please contact DIETZ in writing or by telephone. You will find our contact information on the back of these operating instructions.
CONTRAINDICATIONS in any form, in whole or in part, require the written approval of DIETZ GmbH. The copy- The use of the commode chair is not indicated right is owned by the manufacturer. You can...
Risk of suffocation: Keep the plastic bags out of the reach of children. ACCESSORIES (OPTIONAL) Acessories available from the manufacturer: Upholstered seat with opening for commode seat, black Second pail Fig.1 DIETZ GmbH // User manual for commode chair TSU-2/-4 / Version 2.0.0 EN...
03 PREPARING THE PRODUCT FOR USE ASSEMBLY INSTRUCTIONS The assembly and the functional check are performed by the specialist dealer. The dealer's technician adapts the commode chair to the respective user. WARNING Risk of rolling away: Before any action while stationary, actuate the full brakes on the commode chair.
INSTRUCTIONS FOR USE WARNING Risk of rolling away: Before any action while stationary, actuate the full brakes on the commode chair. Risk of trapping: on all movable parts! DIETZ GmbH // User manual for commode chair TSU-2/-4 / Version 2.0.0 EN...
04 USING THE COMMODE CHAIR 4.1 Locking brakes WARNING The TSU-2/-4 is equipped with four 5-inch swivel Usage hazard: If the locking brakes are dam- castors. Depending on the model selected, the aged or unusable, discontinue use of the com- two rear swivel castors or all four swivel castors mode chair immediately.
2. Slide the pail without a lid over the slide rail from behind under the seat until it locks in place (1, Fig. 10). 3. Remove the seat cushion if necessary. Fig.10 DIETZ GmbH // User manual for commode chair TSU-2/-4 / Version 2.0.0 EN...
The commode chair is not a device for fre- Safety hazard: Should add-ons or accessories quent transport. Should it be necessary to that are not sold by DIETZ are used, the safety of transport the chair, we recommend disassem- the product can not be guaranteed.
The dimensions given here refer to the standard configuration of the commode chair. NOTE All dimensions taken on textile parts (e.g. back upholstery) are to be understood with a toler- ance of +/– 1 cm. Fig.12 Fig.13 DIETZ GmbH // User manual for commode chair TSU-2/-4 / Version 2.0.0 EN...
05 TECHNICAL DATA DIMENSIONS AND MASS TSU-2 / -4 Technical specifications Min. Max. k Total length with leg rests Total length without leg rests b Total width Total height Mass of the heaviest part 6.06 6.26 a Effective seat width f Effective seat depth d Seat surface height (front edge) g Backrest angle...
Leg rests, upper section Steel (powder-coated) Leg rests, lower section Steel (chrome-plated) + plastic (PP) Wheel spokes Galvanised steel Note: All materials used are corrosion-resistant and latex-free. DIETZ GmbH // User manual for commode chair TSU-2/-4 / Version 2.0.0 EN...
06 SAFETY INSTRUCTIONS SAFETY INSTRUCTIONS When using the commode chair, always observe Tipping danger! Please note that body the following safety instructions to prevent falls, movements shift the centre of gravity, hazardous situations and damage to the com- which can increase the risk of the com- mode chair: mode chair tipping over.
Tools are required for some of the individual setting tasks and checks on the TSU-2/-4: Hexagon/open-end spanner (13, 10, 8 mm) Allen key (5 & 4 mm) Phillips screwdriver DIETZ GmbH // User manual for commode chair TSU-2/-4 / Version 2.0.0 EN...
07 INSTRUCTIONS FOR GENERAL USE MAINTENANCE SCHEDULE Monthly What Description before using • When the locking brakes are engaged, the swivel castors Locking brake on the must not be able to rotate. swivel castors If the locking brake is damaged, the swivel castor Check for proper functioning must be replaced by a specialist dealer.
2. Pull the swivel castor out by the wheel fork, downwards and out of the frame tube, and insert the new castor. Finally, screw the new swivel castor to the frame tube. DIETZ GmbH // User manual for commode chair TSU-2/-4 / Version 2.0.0 EN...
07 INSTRUCTIONS FOR GENERAL USE CLEANING To clean the product, use lukewarm water mixed WARNING with a mild detergent (without solvents and Material damages: During disinfection, observe with a pH value of 5-9). After cleaning, wipe with clear water and then dry the chair with a the use and application instructions issued by the cloth.
Otherwise, please take the commode chair to your local waste disposal facility. DIETZ GmbH // User manual for commode chair TSU-2/-4 / Version 2.0.0 EN...
07 INSTRUCTIONS FOR GENERAL USE PRODUCT LABELLING Type plate Type plates and warning signs on the com- mode chair must remain legible. Immediately replace illegible or missing stickers. The serial number sticker is very important for identifying TSU-2/-4 10° 120 kg the product, it is placed on the product label, XXXXXX which is placed on the lower lateral frame...
DIETZ GmbH. Repairs must only be carried out by authorised specialist retailers or by the manufacturer itself. DIETZ GmbH // User manual for commode chair TSU-2/-4 / Version 2.0.0 EN...