Page 1
Heavy-duty shower commode chair User manual version 1.0 EN Standard side element Swivelling side element Abduction side element with standing aid...
Page 2
Record of product identification data: We recommend making a note of your product iden- tification data below so that you have these to hand if you have any queries about your product. All the data can be found on the product label. (See Chapter 5.6 “Product labelling”, Fig. 31.)* Type/model: Item no.
Page 3
DIETZ in writing or by tele- the full technical benefits. In addition, it will pro- phone. You will find our contact information on vide you with information to help keep your the back of this user manual.
Paralysis Loss of limb(s)/limb defects/limb deformities Joint contracture/joint damage Various illnesses/diseases DIETZ GmbH // User manual, XXL products / tauron|dts // Version 1.0 EN...
1 IMPORTANT INFORMATION 1.4 CONTRAINDICATIONS The product must not be used in the case of: Perception disorders Severe balance disorders Inability to sit A user weight exceeding 250 kg Nor must it be used by children or anyone who is less than 146 cm tall and/or who weighs less than 40 kg (BMI <...
1 bolt set: 2 size M6 x 50 mm hexagon socket head bolts, 2 knurled nuts 1 user manual 2.2 ACCESSORIES Toilet pan retaining rail Round toilet pan incl. lid Rectangular toilet pan incl. lid DIETZ GmbH // User manual, XXL products / tauron|dts // Version 1.0 EN...
2 PRODUCT DESCRIPTION 2.3 STRUCTURE OF THE tauron|dts STANDARD SIDE ELEMENT Backrest cushion Backrest Standard side element Cover for hygiene opening Seat cushion Toilet pan (optional) Telescopic leg Rubber foot Abb. 1 2.4 STRUCTURE OF THE tauron|dts ABDUCTION SIDE ELEMENT WITH STANDING AID Backrest cushion Backrest Abduction side element...
The side element sockets for the plug-in tubes should be pointing inwards. When slotting the backrest into the side elements, make sure that the backrest cushion is facing forwards. Abb. 4 DIETZ GmbH // User manual, XXL products / tauron|dts // Version 1.0 EN...
Page 11
3 PREPARING THE PRODUCT FOR USE Align the side elements so that they are parallel with each other (Fig. 5). Working from the front, insert a bolt (M6 x 50 mm) into each side element on the left and right (1, Fig.
The plug-in tubes must be fully inserted and locked with the tube linch pins before using the product. If thetube linch pins are inserted from below, they will not lock properly. DIETZ GmbH // User manual, XXL products / tauron|dts // Version 1.0 EN...
Page 13
3 PREPARING THE PRODUCT FOR USE Place the seat surface centrally on the tube sockets between the side elements, ensuring that it is lying straight (1, Fig. 13). To check that it is fitted correctly, shake the seat Seat depth of 510 mm surface gently.
Risk of accident: Finally, reinsert the bolts, attach the nuts Make sure the bolts are firm- externally and tighten them. ly seated. Abb. 15 DIETZ GmbH // User manual, XXL products / tauron|dts // Version 1.0 EN...
4 USING THE PRODUCT 4.1 TAURON|DTS STANDARD SIDE ELEMENT These side elements (Fig. 16) are designed to meet the general requirements of everyday care settings. Abb. 16 4.2 TAURON|DTS ABDUCTION SIDE ELEMENT WITH STANDING AID The abduction side elements (Fig. 17) add an extra 150 mm onto the seat width so that those who need considerably more space towards the front can sit comfortably on the chair.
Risk of trapping: Be careful of your legs, fin- locking lever by pulling it towards you (1, gers, hands and – where applicable – your cloth- Fig. 20). ing when swivelling the side element. DIETZ GmbH // User manual, XXL products / tauron|dts // Version 1.0 EN...
4 USING THE PRODUCT Release the side element from its fastener by lifting it up and to the side (2, Fig. 20). The side element can now be swivelled down (3, Fig. 20). You can now transfer yourself into or out of the chair by moving sideways.
Make sure that plug-in tubes (1, Fig. 23.) the tube linch pins are not pointing downwards; otherwise, they may become detached. Abb. 22 DIETZ GmbH // User manual, XXL products / tauron|dts // Version 1.0 EN...
4 USING THE PRODUCT The seat surface is now free to move and can be raised (2, Fig. 23) and rotated 180° (3, Fig. 23). To secure the seat surface, please follow the instructions in Chapter 3.5, starting from no. 2. Abb.
The conformity declared by DI- be observed. ETZ GmbH according to MDR 2017/745, Annex II is rendered null and void. DIETZ GmbH // User manual, XXL products / tauron|dts // Version 1.0 EN...
5 TECHNICAL SPECIFICATIONS 5.1 DIETZ'S MEASUREMENT SYSTEM The dimensions given here refer to the standard configuration of the product. NOTE All dimensions measured on textile parts (e.g. backrest height) are to be understood as ap- proximate values that are subject to a tolerance of +/–...
Weight of shower commode chair excluding removable parts (in this case: without seat surface, plug-in tubes and toilet pan). Maximum user weight including any additional load. The weight of the additional load reduces the maximum user weight accordingly. DIETZ GmbH // User manual, XXL products / tauron|dts // Version 1.0 EN...
5 TECHNICAL SPECIFICATIONS 5.4 FURTHER INFORMATION Specifications tauron|dts Colours Mangan Grey-01, Mangan Grey-02, Lime Green Standard side element Abduction side element with standing aid Swivelling side element Backrest incl. backrest cushion 1.45 Seat cushion Plug-in tube Round toilet pan 0.54 Rectangular toilet pan Telescopic leg 0.17...
The product is only approved for indoor use. Follow the user manual. Caution: Note the safety instructions in the user manual! Medical Device CE marking MDR 2017/745 Annex VIII DIETZ GmbH // User manual, XXL products / tauron|dts // Version 1.0 EN...
6 SAFETY INSTRUCTIONS 6.1 SAFETY INSTRUCTIONS When using the product, always observe the fol- lowing safety instructions to prevent falls, haz- ardous situations and damage to the product: The product is only to be used indoors and Serious incidents that occur in relation to on a firm, level surface.
The checks must also be per- formed after longer storage periods (>4 months) and whenever the product is going to be re- used. DIETZ GmbH // User manual, XXL products / tauron|dts // Version 1.0 EN...
7 CARE AND MAINTENANCE 7.2 MAINTENANCE SCHEDULE Monthly What Description Before use Seat surface and backrest • The seat surface and backrest cushion must not be damaged. cushion • In the event of functional or surface damage, the components must be replaced by a specialist retailer. Check for damage Adjustable parts •...
Consult an authorised • The locking lever is defective. specialist retailer. Squeaking and grinding noises can Consult an authorised • There are various possible causes. be heard. specialist retailer. DIETZ GmbH // User manual, XXL products / tauron|dts // Version 1.0 EN...
7 CARE AND MAINTENANCE 7.4 CLEANING To clean the product, use lukewarm water mixed WARNING with a mild detergent (without solvents and Material damage: with a pH value of 5 to 9). Do not use any of the fol- After cleaning, wipe with clear water and then lowing for cleaning purposes: high-pressure dry the chair with a cloth.
After longer periods of storage (> 4 months), please check all the inspection points on the product as listed in the maintenance schedule before reusing/redeploying the product. DIETZ GmbH // User manual, XXL products / tauron|dts // Version 1.0 EN...
8.3 LIABILITY DIETZ GmbH only bears liability if the products that have not been approved by DIETZ GmbH. are used under the specified conditions and for Repairs must only be carried out by authorised the specified purposes.
Need help?
Do you have a question about the tauron dts and is the answer not in the manual?
Questions and answers