Table of Contents
Advertisement
you wish, you can fix it in place using the
two screws (1, Fig. 12). Fully tighten the
screws!
6. The depth of the back strap can be varied in
two settings. In this case, loosen the screws
connecting the back strap and the back
strap holders (5, Fig. 12). The depth varies
depending on the hole selected.
7. Reinsert the screws to the desired setting
and tighten them. Ensure that you use the
correct pair of holes (the respective front or
rear holes of the back strap).
4 USING THE PRODUCT
WARNING
Sources of fire! Please keep the back strap
away from sources of fire to prevent ignition.
Risk of tipping! Make sure that the brakes are
locked before you sit down, and be aware that
leaning against the back strap will reduce the tilt
stability.
NOTE
The seat is only designed to be used for short
periods, i.e. when taking a short break when
walking. For longer breaks, use conventional
seating.
2
1
4
3
5
Fig. 12
21
EN
Advertisement
Table of Contents
