Table of Contents
Advertisement
3.3 ADJUSTING THE GRIP HEIGHT
1. Loosen the locking screws of both push
handles by turning them anticlockwise two
turns (1, Fig. 3). Do not loosen the locking
screws fully.
2. The push handles can now be adjusted in
height (2, Fig. 3). In doing so, they position
themselves automatically at the markings. A
clicking sound can be heard when it clicks
into place.
3. When you adjust the height,
orientate yourself on the step indicator so
that both push handles are set at the same
height.
4. When the correct height of the push handles
has been found, tighten the locking screws
(1, Fig. 3) again (clockwise).
Familiarise yourself thoroughly with your prod-
uct before using it for the first time so that you
feel safe and confident handling the rollator.
Seek the support of an accompanying person.
Check that the rollator has been correctly as-
sembled before using it:
P Are all attached parts firmly fixed in place?
P Have all screws been firmly tightened?
P Do the brakes work?
P Does the rollator rest on all four wheels?
P Do the wheels turn smoothly when
pushed?
P Is the rollator fully unfolded and the
folding lock engaged?
3 PREPARING THE PRODUCT FOR USE
P Is the rollator bag hanging correctly in the
magnetic bag suspensions (see also section
"Standard bag")?
WARNING
Safety hazard! Never fix the push handles be-
tween the locking positions of the step indicator,
instead fix them precisely on one of the pre-set
positions! This is the only way of ensuring a se-
cure fix!
Safety hazard! Both locking screws must be
firmly tightened prior to using the rollator.
NOTE
To use TAiMA VENTUM correctly, it must be ad-
justed to your individual size. This adjustment
should be performed by a trained person.
2
1
Fig. 3
11
EN
Advertisement
Table of Contents
