Table of Contents
Advertisement
8
03 BUILD UP THE ROLLATOR
7
2
3
1
4
6
Adjusting armrests & handles
Now adjust the correct height of the armrests
and the position of the handles.
Insert the hexagonal screw (4, pic. 3) from the
inside of the main frame through the borehole.
Now guide the curved washer over the screw
thread. Ensure that the hexagonal head of the
screw is seated in the "hexagonal cut-out" of
the frame tube (5, pic. 3). This allows you to
tighten the star screw without the need for
tools (6, pic. 3).
Now check the position of the handlebars. The-
se can be adjusted in depth to the length of your
forearms.
Make sure that the handle tubes are only fixed
inside the corrugated area (7, pic. 3) of the
T-tubes.
TOMTAR / Bedienungsanleitung Rollator FAKTO+ Arthritis / Version 1.0.0 DE
TOMTAR / User manual FAKTO+ Arthritis / Version 1.0.0 DE / EN
In order not to impaire the stability of the rolla-
pic. 3
tor, the end of the handle tubes (8, pic. 4) must
not disappear in the T-tube!
Now tighten the clamping lever (3, pic. 3) and
adjust it so that the lever points in the opposite
direction to the direction of travel.
5
Checking for correct assembly
Now check that the rollator has been correctly
assembled:
c
c
c
If you are unsure as to whether the rollator is
assembled correctly, please contact your medi-
cal supply store or an authorised specialist re-
tailer.
9
The rollator must stand securely on all
four wheels.
The clamping levers and clamp levers must
be securely tightened..
The handle tubes and the T-tubes with the
armrests must be assembled so that they
are not able to rotate.
pic. 4
8
Advertisement
Table of Contents
