• 6 x 16 mm flat-head screws 4
A
D
B
Connect the pedal cord.
The pedal cord from the pedal box must be plugged into
the PEDAL connector on the rear of the main unit. Once
connected, attach the cord holders to the rear panel as
shown, then clip the cord into the holders.
5
• Use the vinyl tie that was removed from the bundled pedal
cord in step X to tie up any slack in the pedal cord.
• Cord holder
• Kabelhalter
• Serre-câble
• Soporte del cable
43
CVP-109/107/105/103/700