Yamaha Clavinova CVP-103 Reference Booklet page 63

6
N
Attach the pedal box assembly.
CAUTION
• When you lift the pedal box assembly, make sure that you lift by
both legs.
Before attaching the rear leg and pedal box assembly,
insert the pedal cord plug extending from the left leg into
the corresponding socket in the main unit. Make sure
that the protruding clip on the connector is on the right.
Put the excess cord into the leg and loosely secure the
rear leg and pedal assembly using six 5 x 12 millimeter
large screws for each leg (four screws per leg and two
screws on each leg bracket). Once the rear leg and pedal
assembly has been loosely attached, go back and tighten
all 12 of the screws on the rear leg and pedal assembly,
and also secure the 8 screws on the speaker box.
• Six screws on each side
CVP-109/107/105/103/700
63