Connect The Pedal Cord - Yamaha YDP-121 Owner's Manual

• 6 x 16 mm flat-head screws 4
D
N

Connect the pedal cord.

The pedal cord from the pedal box must be plugged into the PEDAL connector located at the rear of the main unit's under-
side. Once connected, attach the cord holders to the rear panel as shown, then clip the cord into the holders.
6
A
• Use the vinyl tie that was removed from the bundled pedal cord in
step X to tie up any slack in the pedal cord.
Cord holder
33
YDP-121