Yamaha Clavinova CVP-103 Reference Booklet page 65

8
240
127
• A voltage selector is provided in some areas.
<
Voltage Selector
Before connecting the AC power cord, check the setting of
the voltage selector which is provided in some areas. To set
the selector for 110V, 127V, 220V or 240V main voltages,
use a "minus" screwdriver to rotate the selector dial so that
the correct voltage for your region appears next to the
pointer on the panel. The voltage selector is set at 240V
when the unit is initially shipped.
After the proper voltage has been selected, connect the AC
power cord to the AC INLET and an AC wall outlet.
A plug adaptor may be also provided in some areas to match
the pin configuration of the AC wall outlets in your area.
CAUTION
• An improper voltage setting can cause serious damage to the CVP-
109 /107 or result in improper operation.
>
Set the adjuster.
For stability, an adjuster is provided on the bottom of the
pedal box. Rotate the adjuster until it comes in firm contact
with the floor surface. The adjuster ensures stable pedal
operation and facilitates pedal effect control. If the adjuster
is not in firm contact with the floor surface, distorted sound
may result.
9
65
CVP-109/107/105/103/700