Secure The Speaker Box. - Yamaha Clavinova CVP-103 Reference Booklet

7
64
CVP-109/107/105/103/700
• Two screws on each side
M

Secure the speaker box.

Stand the main unit on its legs and securely attach the
speaker box to the bracket on the front legs using two 5 x 12
millimeter large screws for each bracket. If it is impossible
to align the bracket holes with the speaker box holes,
slightly loosen the three screws on each of the front legs,
align the holes, and secure the speaker box. After the
speaker box is firmly attached, retighten the screws on the
front legs firmly. Put the speaker box cover back in place
with the rounded edge of the cover at the bottom, insert the
plugs on the cover into their corresponding holes on the
speaker box.
CAUTION
• When attaching the cover first, make sure the cover is not upside-
down (the plugs will damage the speakers if attached upside-down)
and make sure you push where the plugs are. The speaker cover is
made of a soft material so pushing in a place where there are no
plugs may cause damage.
• Make sure the plugs are fully inserted and there is no
space left around the plugs and holes.
CVP-109