Royal Enfield SCRAM 411 Owner's Manual page 99

MINOR MAINTENANCE TIPS
HEADLAMP BULB REPLACEMENT
1. Locate the 3 lugs in the bulb correctly
in the reflector.
2. Locate the bulb holding clip over
the bulb and lock it in the slot in the
reflector.
3. Put the protective rubber cap over
the bulb correctly such that the vent
pipe is facing downwards.
4. Connect head lamp coupler on the bulb
terminals correctly.
5. Locate the headlamp rim in the housing
correctly such that it locks in place
6. The two mounting holes in the rim are
aligned with the holes in the housing
7. Assemble the 2 screws and tighten firmly.
8. Refit the headlamp assembly and ensure
the third mounting hole in the bottom of
the housing is aligned with the bracket slot.
Royal Enfield Scram 411 97