Royal Enfield SCRAM 411 Owner's Manual page 59

OPERATION OF CONTROLS-TRIPPER (IF FITTED)
NOTE
1. After every Ignition "ON" cycle tripper will be in
discoverable mode for 120 sec.
2. lncase there is no connection established within 120 sec
display will enter into clock mode to re-initiate connection
Ignition "OFF-ON" cycle to be repeated.
3. During Navigation mode if there is no input from
smartphone for 5 sec. Bluetooth connection will be
terminated to avoid power draw and will display clock.
4. Bluetooth connection can be terminated by end user also
by closing the mobile application.
5. For first time pairing user needs to enter the secured pin
shown on tripper through Royal Enfield Mobile App to
setup the device, after that auto-pairing will happen if same
device is connected.
6. Everytime the tripper is paired the clock time will sync with
mobile time after which it will continue to run with internal
clock even in case of disconnection, there will be time
difference between time shown on instrument cluster and
tripper - customer needs to update cluster clock inline with time
shown on tripper as and when required as mentioned in push
button management of cluster.
7. Do not apply or use gasoline/petrol related fluids for cleaning
or wiping on instrument cluster or Tripper, as it will result in
permanent damage to the same.
Royal Enfield Scram 411 57