Royal Enfield SCRAM 411 Owner's Manual
  1. Manuals
  2. Brands
  3. Royal Enfield Manuals
  4. Motorcycle
  5. SCRAM 411
  6. Owner's manual
Royal Enfield SCRAM 411 Owner's Manual

Royal Enfield SCRAM 411 Owner's Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

ROYAL
ENFIELD
OWNER'S
MANUAL
USA / CALIFORNIA

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the SCRAM 411 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Royal Enfield SCRAM 411

Summary of Contents for Royal Enfield SCRAM 411

  • Page 1 ROYAL ENFIELD OWNER’S MANUAL USA / CALIFORNIA...
  • Page 3 Always ready for what comes next; without a second thought. Living life on an instinct, spontaneous & restless SCRAM 411 is all-ready to take it on. While the Scram is all-ready, this Owner’s Manual prepares you to be ready before you set out to Scram. It thoroughly covers features, capability, operation of the controls and quick fixes.
  • Page 4 "© Copyright 2022 Royal Enfield (A unit of Eicher Motors Ltd.). All Rights Reserved. No part of this manual shall be copied, distributed or otherwise dealt without the express permission in writing of Royal Enfield".
  • Page 5 We would like to emphasize that any repairs to the induction, emission, exhaust and evaporative systems must be performed only by a Royal Enfield Authorised Dealer so that the motorcycle confirms to the United States Environment Protection laws, Federal Motor Vehicle Safety Standards and California Air Resources Board regulation (Applicable only for motorcycles sold within the state of California.)
  • Page 6 If you believe your motorcycle has a defect which could cause a crash and result in serious injury or loss of life, you should immediately contact the National Highway Traffic Safety Administration (NHTSA) in addition to notifying Royal Enfield North America Limited, 226 N Water St., Milwaukee WI 53202 US.

  • Page 7: Table Of Contents

    Running in period................65 Evaporative emission control system warranty......... 124 Warning indications & safety systems.......... 66 Environment care................126 Starting..................70 Radio type approval................128 Gear shifting, ridings & stopping........... 72 Service maintenance record.............. 130 Parking................... 73 Notes....................131 Royal Enfield Scram 411...

  • Page 8: Safety Definitions

    All images in this manual are only for reference and to explain the relevance. They may not be exactly the same in the motorcycle you own. Technical specifications are subject to change without prior notice. Royal Enfield Scram 411...

  • Page 9: Personal And Motorcycle Information

    Mobile : Email : Licence No. Valid till : Model Color : Engine No. VIN. No. Rear: Tire Make Front : Rear: Tire Nos. Front : Battery No : Battery Make Sold by Date of Sale Royal Enfield Scram 411...

  • Page 10: Safe Operating Rules

    SAFE OPERATING RULES Royal Enfield motorcycle are designed to serve as a means of Before starting the motorcycle, check for proper operation of personal transport, and for on-road use only. It is not meant to be brakes, clutch, gear shifter, handle bar controls, tire pressure, used as an off-road motorcycle.
  • Page 11 Fuels containing methanol should not be used as it can cause damage Use only genuine Royal Enfield spare parts and approved to the fuel system components. accessories. Use of other manufacturer’s performance parts may affect the performance of your motorcycle and render ■...
  • Page 12 Take care not to spill any fuel on the engine, exhaust pipes, rubber parts or any other part of the motorcycle. Royal Enfield Scram 411...
  • Page 13 Regularly inspect front forks, rear shock absorbers and rear suspensions, for any war, looseness/side play, oil leaks etc. Replace worn parts. Worn parts can adversely affect stability and handling. Royal Enfield Scram 411...
  • Page 14 Do not operate motorcycle with a loose, worn or damaged steering affecting stability and increases the possibility of loss of control. system, including the front and rear suspension system. Contact your Royal Enfield Authorised Dealer for repair of steering or NOTE suspensions system. Damaged steering or suspension components...
  • Page 15 Do not allow fatigue, upsetting forces: alcohol or drugs to endanger your safety or that of others. Wind blasts from passing trucks.  Rough uneven road surfaces.  Slippery road surfaces.  Royal Enfield Scram 411 13...
  • Page 16 Owner's visibility in traffic, especially at night. Avoid loose, flowing Manual. garments and scarves. Use only genuine Royal Enfield spare parts and approved ■ ■ When carrying a pillion rider, it is your responsibility to accessories.
  • Page 17 In some cases small punctures in the tread area may Manual. Particularly important to motorcycle stability is proper be repaired from within the demounted tire by your Royal Enfield tire inflation pressure, tread condition. Pay strict attention to Authorised Dealer. Speed should not exceed 60 Km/h (40 mph) loose and/or broken spokes, free movement of steering system.
  • Page 18 SAFE OPERATING RULES Contact your Royal Enfield Authorised Dealer for repair of WARNING steering or suspension system. Damaged steering or suspension components may adversely affect handling which could result in Avoid any contact with the exhaust system. Wear clothing that will serious injury.
  • Page 19 Exercise extreme caution while handling a Consult your Royal Enfield Authorised Dealer regarding any questions battery. Wash hands thoroughly whenever a battery is handled. or problems that occur in the operation of your motorcycle. Failure to...
  • Page 20 Use only genuine Royal Enfield replacement fasteners tightened result in serious injury. to the proper torque (See your Royal Enfield work shop manual). We caution you against the use of certain nonstandard parts such as aftermarket and custom made fasteners which may not have specific strength, finish and type requirements to perform properly in the assembly and its environment.
  • Page 21 Do not pull a trailer behind a motorcycle. Towing a trailer may cause reduced braking efficiency, tire overloading and unstable handling. Towing a trainer may cause loss of control of the motorcycle in the front, leading to an accident resulting in serious injury. Royal Enfield Scram 411 19...

  • Page 22: Accessories And Cargo

    ACCESSORIES AND CARGO Royal Enfield cannot test and make specific recommendations Do not exceed 70 mph (110 km/h) riding solo. ■ concerning specific or a combination of accessories sold. Therefore, ■ Do not exceed 55 mph (90 Km/h) when carrying a passenger or the rider must be responsible for safe operation of the motorcycle cargo.
  • Page 23 Additional electrical accessories and equipments may ■ overload the motorcycle’s electrical system and will result in Royal Enfield cautions you against use of nonstandard parts such system and/or component failure. as aftermarket and custom made extended front forks which may Large surfaces such as fairings, windshields, backrests and ■...

  • Page 24: Technical Specifications

    IGNITION SYSTEM Max torque ....32 Nm @ 4250 ± 250 rpm Ignition system ..Electronic ECU/Variable Idle rpm....1300 ± 100 rpm Spark plug ....Bosch - UR5CC Starting system ..Electric start Spark plug gap ...0.7 to 0.8 mm Royal Enfield Scram 411...
  • Page 25 Secondary ratio..2.533:1 Primary ratio .... 2.312:1 Drive chain links..110 links Gear box....5 Speed, constant mesh Gear Ratio Gear ....1 2.916:1 Gear....2 1.833:1 Gear....3 1.428:1 Gear....4 1.173:1 Gear....5 1.000:1 Royal Enfield Scram 411 23...
  • Page 26 Rear....Monoshock with linkage, 180mm Front Size : wheel travel 100/90-19" 57S Brakes Make, Tire : CEAT Rear Size : Brake system..Dual channel ABS 120/90-17" 64S Front disc..300 mm Dia disc. Rear disc ... 240 mm Dia disc. Royal Enfield Scram 411...
  • Page 27 Ethanol content..E10 or less It is recommended to use only unleaded petrol, as leaded petrol may cause damage to the catalytic converter. Minimum octane..91 RON (Research octane rating number) or higher Royal Enfield Scram 411 25...
  • Page 28 Tail lamp/Brake lamp....12V - 21/5 W - BULB Hazard switch......12V, 10W *4 Nos Licence Plate illuminator....12V-LED Front position lamp....12V -LED Speedometer lamp.....12V -LED Hi beam indicator ......12V - LED Neutral lamp telltale ....12V - LED Royal Enfield Scram 411...
  • Page 29 DIMENSIONS Length......2160 mm Width ....... 840 mm Height ......1165 mm Wheel base ...... 1455 mm Ground clearance..... 200 mm Saddle height ....795 mm Royal Enfield Scram 411 27...

  • Page 30: Recommended Lubricants

    Using non recommended/in-correct oils, can cause serious damage to the moving parts, affect performance of the motorcycle and void the warranty. NOTE Oil level should be up to “MAX” level. Do not overfill as it will affect the clutch functioning. Recommendation subject to change without notice. Royal Enfield Scram 411...

  • Page 31: Motorcycle Identification Numbers

    Model Engine type Net brake horse power of the engine in hp Check digit Model year (2020:L, 2021:M, 2022:N) Plant location (C-Chennai ,K-Kanchipuram, V-Vallam Vadagal) Engine capacity (4 - indicating 411 cc) Running serial number Royal Enfield Scram 411 29...
  • Page 32 * Applicable for USA and CALIFORNIA CAUTION It is illegal to tamper with or alter the VIN/Engine numbers of the motorcycle as it will not only against the law but will render the vehicle registration and warranty void. Royal Enfield Scram 411...
  • Page 33 PREEU0014MD1 411cc PURGE FUEL: UNLEADED 91 OCTANE DRAIN PLUG MANUFACTURER: ROYAL ENFIELD, A UNIT OF EICHER MOTORS LIMITED, INDIA OR HIGHER IMPORTER: ROYAL ENFIELD NORTH AMERICA LIMITED (SUBSIDIARY OF EICHER MOTORS CATALYST THROTTLE ENGINE OIL: 15W-50, API SL GRADE VENT...

  • Page 34: Engine Number Details

    Please do not tamper with the engine number as its is prohibited by law. XXXXXX Engine Family ENGINE NUMBER Engine Capacity Type of Cooling Type of Transmission Fuel Feed Manufacturing Plant (0)-TVT, 1-ORG) Year of Manufacture (2020:L, 2021:M, 2022:N) Month of Manufacture (A-Jan., H-Aug., K-Sep., N-Dec.) Production Serial Number Royal Enfield Scram 411...

  • Page 35: Location Of Key Parts

    7. Tripper (If fitted) 8. Engine kill switch 9. Info button (Which is available in the RH switch module) 10. Rear view mirror right side 11. Electric start switch 12. Hazard switch 13. Fuel tank cap Royal Enfield Scram 411 33...
  • Page 36 LOCATION OF KEY PARTS 1. Front trafficator right side 2. Horn 3. Oil level window 4. Rear brake pedal 5. Rider foot rest right side 6. ABS module 7. Pillion foot rest right side 8. Rear trafficator right side Royal Enfield Scram 411...
  • Page 37 3. ABS module 4. Canister 5. Pillion foot rest left side 6. Tail lamp 7. Reartrafficator left side 8. Licence plate illuminator 9. Side stand 10. Rider foot rest left side 11. Gear change lever Royal Enfield Scram 411 35...

  • Page 38: Operation Of Controls

    Insert key, turn clockwise to ignition “OFF” position. If users, besides causing severe damage to the motorcycle. required, gently shake handle bar to help unlock steering easily. Royal Enfield Scram 411...
  • Page 39 Petrol is highly explosive. Please ensure there are no open flames Key cannot be removed when fuel tank cap is open. or sparks nearby while refueling and fill fuel tank only in a well ventilated area. Royal Enfield Scram 411 37...
  • Page 40 Do not switch “OFF” ignition while riding the motorcycle. Doing so Fuel filler collar can cause a potential accident, resulting in serious injury to both Anti splash plate rider and other road users, besides causing severe damage to the motorcycle. Maximum fuel level Royal Enfield Scram 411...
  • Page 41 E-START SWITCH Depress & hold until engine starts Turn signals do not work when the hazard light switch is "ON". ■ for a maximum of 5 seconds. ■ All the trafficator lamps will flash simultaneously. Royal Enfield Scram 411 39...
  • Page 42 Hazard will start working - Ignition switch OFF - Hazard wil keep working for a duration of 30 mins - Unless manual deactivation DIMMER SWITCH (OFF). High beam NOTE Low beam Hazard flasher cannot be activated in Ignition switch OFF condition. Royal Enfield Scram 411...
  • Page 43 To cancel the turn signal lights, push the switch in beam filament in head light. It after it has returned to the center position. is giving indication to vehicle coming from opposite side while overtaking. Royal Enfield Scram 411 41...
  • Page 44 Gently press on top to release the tabs from the frame and open slightly. To completely remove, release the bottom tabs from the frame by pulling out gently. When washing the motorcycle, be careful not to flood this area with water. Royal Enfield Scram 411...
  • Page 45 Press this button to select TRIP A/B, Clock settings and TRIP A/B reset in the cluster. If Trip F enabled TRIP1 TRIP2 TRIPF If Trip F not enabled TRIP1 TRIP2 NOTE ■ For trip re-set press info button for T>3 sec. Royal Enfield Scram 411 43...
  • Page 46 ODO TRIP F A B 88888.8 miles DISCLAIMER : Cluster unit display may look dull during sun overhead conditions this is normal and due to impact of direct sunlight on the unit customers to refer during other riding conditions. Royal Enfield Scram 411...
  • Page 47 Will reset to l2:00AM when 00.00 GEAR battery is disconnected. ODO TRIP F AB 00000.8 miles 00.00 GEAR ODO TRIP F AB 00000.8 miles 1. Clock 2. Service reminder 3. Odometer 4. Trip value (A/B & F) Royal Enfield Scram 411 45...
  • Page 48 Toggle between am or pm INFO T>3sec INFO Save data and exit clock setting mode NOTE: In case no action is observed between clock setting function for more than 20 sec last shown value to be displayed. Royal Enfield Scram 411...
  • Page 49 00.00 GEAR i) 1 service - 450 km ODO TRIP F AB 00000.8 ii) 2 service - 4,900 km miles iii) From there on for every 5,000 km from previous value (ex: 9,900. 14,900 etc.) Royal Enfield Scram 411 47...
  • Page 50 0.2<T<1 In ignition key "ON" ODO >Trip A INFO 0.2<T<1 Trip A> trip B TRIP A Reset Trip A INFO T>3 INFO 0.2<T<1 Trip B> Trip F / ODO TRIP B INFO T>3 Reset Trip B Royal Enfield Scram 411...
  • Page 51 LCD. It is recommended not to ride vehicle Fuel indication will vary on rough road, uphill and downhill conditions, in these condition as it will result in fuel pump damage. for accurate indication refer during slow speed or flat surfaces. Royal Enfield Scram 411 49...
  • Page 52 Never attempt to operate the info buttons while riding the motorcycle. Doing so will cause loss of concentration and unstable riding, leading to a potential accident resulting in serious injury to both rider and other road users, besides causing severe damage to the motorcycle. Royal Enfield Scram 411...
  • Page 53 ECU & tale “ON” for low fuel condition. sensors. Please visit the nearest authorised Royal Enfield Dealer Low Battery Indication : Indicator to diagnose & rectify the defect in the EMS.
  • Page 54 Failure to do so will cause the motorcycle to run out of fuel and get stranded in addition to causing serious damage to the fuel pump. CAUTION Do not run motorcycle incase the ABS Indicator lamp continuously "ON". Royal Enfield Scram 411...
  • Page 55 Tripper Background display can be switched between day mode and night mode which can be selected by riders from Royal Enfield Mobile App. Scan the QR Code, to download, Install, register and to know more AMPM...
  • Page 56 Time of Arrival (ETA). Clock display (in case of no connectivity, no navigation input or after destination is reached). User can select day and night mode (through Royal Enfield Mobile App only). 152.7 km Low battery indication.
  • Page 57 100 m, if there is no turn the display will be blank in this region. Connectivity control only through Royal Enfield Mobile App. Distance to destination or ETA: Shows the total distance to destination or Estimated Time of Arrival (based on user selection from Royal Enfield Mobile App).
  • Page 58 RE logo SW version helmet Google in paired mode tripper will show clock. Clock a) lf no connection is established. b) If connection is established but no navigation input is observed. c) Once destination is reached. Royal Enfield Scram 411...
  • Page 59 For first time pairing user needs to enter the secured pin shown on tripper through Royal Enfield Mobile App to setup the device, after that auto-pairing will happen if same device is connected.
  • Page 60 10. Royal Enfield Mobile App works with bluetooth version 4.2 Bluetooth connection can be established only through and N+ 1.0, for other lower versions performance lag can be Royal Enfield Mobile App.

  • Page 61: Pre-Operational Checks

    Failure to do so will affect safe Free movement of handle bar to left and right sides. operation, damage your motorcycle and lead to accident causing 10. All electrical controls horn working correctly serious injury. Royal Enfield Scram 411 59...

  • Page 62: Safe & Happy Riding

    Use extra caution licensed riders and are thoroughly familiar with the operating when approaching and passing through intersections, conditions of your motorcycle. Royal Enfield Scram 411...
  • Page 63 Always wear protective clothing that covers your legs, an- kles, and feet. The engine or exhaust system become very hot during or after operation and can cause burns. Royal Enfield Scram 411 61...
  • Page 64 Please use utmost caution while applying brakes, especially Do not place the foot on the brake pedal while riding unless braking while riding under wet or bad road conditions. is required. Because this will lead to premature wear of brake pad. Royal Enfield Scram 411...

  • Page 65: Rules Ofthe Road

    A moving line of traffic Keep to the correct side of the road center line when meeting always has the right-of-way. oncoming vehicle. Royal Enfield Scram 411 63...
  • Page 66 Royal Enfield Scram 411...

  • Page 67: Running In Period

    RUNNING IN PERIOD The Scram 411 Motorcycle is capable of consistent high Motorcycle First 5OO km / 501 - 2,000 km / speeds. However as with any new motorcycle. a "Running-In Speed 310 - 1243 miles 310 miles Gear period" procedure is essential to help in proper "Bedding-In"...

  • Page 68: Warning Indications & Safety Systems

    It is recommended to take the motorcycle to moderator to momentarily and continuously reduce the hydraulic a nearest Royal Enfield Authorized Service station for a detailed pressure and thereby prevent the brakes from locking the wheels inspection and correction of the EFI system.
  • Page 69 Royal Enfield distributor. Failure to do so can result in Switch “OFF both ignition & stop switches, wait for a few a serious injuries and loss of life.
  • Page 70 Please apply both brakes to stop - front brake momentarily earlier, followed by rear brake. To have better traction and control of the motorcycle. Royal Enfield Scram 411...
  • Page 71 Do not apply only the front or rear brakes it can lead to ■ ■ In the event of the ABS indicator remaining continuously "ON" inefficient braking. please take the motorcycle to a nearest authorized Royal Enfield Service station to inspectthe brakes system control of the vehicle. Royal Enfield Scram 411 69...

  • Page 72: Starting

    Failure to adhere in damage to the engine. Please move motorcycle back and forth while simultaneously shifting gears. Switch "ON" ignition and the kill switch to "RUN" position. Depress clutch lever fully. Press starter button and hold till engine starts. Royal Enfield Scram 411...
  • Page 73 It is recommended not to accelerate by giving excessive throttle for more than 5 min when the engine is in idle condition, which will cause damage to the engine internal parts and exhaust system as well. Royal Enfield Scram 411 71...

  • Page 74: Gear Shifting, Ridings & Stopping

    The clutch must be fully disengaged before attempting a gear Down shift. Failure to fully disengage the clutch will cause a jerky start 23.0 or stalling the engine besides causing damage to transmission 15.5 Shift parts. 11.2 Royal Enfield Scram 411...

  • Page 75: Parking

    The and fuel) when gear is engaged. side stand or frame will become damaged and the motorcycle will b) Engine will not start if gear is engaged already. fall over. Royal Enfield Scram 411 73...

  • Page 76: Periodical Maintenance Chart

    The Periodical maintenance schedule detailed below is based upon average riding conditions and indicates the intervals at which regular inspections, adjustments, replacements and lubrications must be carried out to help maintain your Scram 411 motorcycle meticulously. If in case the motorcycle is used frequently in very dusty environment/severe climatic conditions/poor roads/stagnant water etc., the maintenance will need to be done earlier as will be required.
  • Page 77 Check for screw tightness in all services Air filter element Clean/ Replace more frequently if motorcycle always used in dusty / off Road conditions. Accelerator cable I&A I&A I&A I&A I/A/R I/A/R I/A/R I/A/R I/A/R I/A/R I/A/R Royal Enfield Scram 411 75...
  • Page 78 Throttle body cleaning every 10,000 kms / 12 Months or earlier as required Clutch cable I&A I&A I&A I&A I/A/R I/A/R I/A/R I/A/R I/A/R I/A/R I/A/R Clutch free play Adjust every l,OOO kms or earlier as required Clutch no slippage Royal Enfield Scram 411...
  • Page 79 Clean, lubricate & adjust every l,OOO kms or earlier as required Battery terminals (apply petroleum jelly) Earth wire eyelet tightness Hydraulic brake fluid - front & rear# Hydraulic brake hose & washers - front & rear# Royal Enfield Scram 411 77...
  • Page 80 Inspect & If required lubricate for every 5,000 km or earlier as Swing arm pivot bearings# required. Replace if necessary Inspect & If required lubricate for every 5,000 km or earlier as Rear suspension linkages# required. Replace if necessary Royal Enfield Scram 411...
  • Page 81 I&T I&T I&T I&T I&T Hand levers, center stand, side stand, rider & pillion foot rest Lubricate every 1,000 kms or earlier as required pivots & gear shift levers# Cam chain/chain pads/auto chain tensioner I&R Royal Enfield Scram 411 79...
  • Page 82 # Service more frequently when riding in rain or at full throttle. #(1) Tire to be replaced if the tire wear identification mark reached (2) To be done at authorised Royal Enfield Dealer/Service Center For maintenance after 50,000 km. please repeat same frequency specified above. in consultation with a Royal Enfield Authorised Dealer/Service Centre.

  • Page 83: Tools Kit

    To loosen/tighten hex nuts open end 17 • 13 mm Combination ring To loosen/tighten wheel spanner 24 • 14 mm mm axle nuts D.E. Spanner 10 • 12 mm To loosen/tighten hex nuts Tool wallet For storing tools Royal Enfield Scram 411 81...

  • Page 84: Minor Maintenance Tips

    Lubricate the center stand pivot or feel it is best done by an experienced person, we recommend periodically for smoother operation you to get in touch with a Royal Enfield Authorised Dealer/ of center stand. Service Centre. HAND LEVER PIVOTS Wipe the area free of dirt/grease.
  • Page 85 Using non recommended/in-correct oils, can cause serious damage to the moving parts, affect performance of the Make sure the spark plug, spark plug cap and HT cable are motorcycle and void the warranty. proper fitment. Royal Enfield Scram 411 83...
  • Page 86 In the event of a spill, please clean the area Solo 1.75 kg/cm' (25 psi) 2.25 kg/cm' (32 psi) immediately with a soft cloth (preferably a wet cloth) to avoid With Pillion 1.89 kg/cm' (27 psi) 2.39 kg/cm' (34 psi) damage. Royal Enfield Scram 411...
  • Page 87 Place a suitable spacer of 4 mm thickness, Loosen pinch bolt on right fork end between the brake pads to avoid with 6 mm allen key. accidental compression of the brake lever. Royal Enfield Scram 411 85...
  • Page 88 Insert wheel spindle from right fork end. Ensure the position of RH side collar & disc side spacer aligned properly. Holds spindle on right side,locate washer and nut on spindle on left side and tighten firmly. Royal Enfield Scram 411...
  • Page 89 Pull out the wheel axle from the left side, taking care not to Place a suitable spacer of 4 mm thickness, between the brake drop the wheel spacers. pads to avoid accidental compression of the brake lever. Royal Enfield Scram 411 87...
  • Page 90 Position the respective spacers on the left and right side of the wheel hub. Fix the brake hose pipe in swing arm clips properly Ensure the axle mounting hole in the swing arm, wheel hub and caliper bracket are aligned. Royal Enfield Scram 411...
  • Page 91 DRIVE CHAIN TENSION (FREE PLAY 20-30 mm) center stand. Measure the drive chain free play on the top run of the chain. The recommended free play is 20 to 30 mm. Royal Enfield Scram 411 89...
  • Page 92 10. Tighten rear wheel spindle nut to a specified torque. If the engine/rear sprocket are worn, replace the engine/rear sprocket & rear chain as a kit. Royal Enfield Scram 411...
  • Page 93 After adjustment tighten the Tighten lock nut (A) after lock nut in master cylinder push adjustment is done. rod assembly. Royal Enfield Scram 411 91...
  • Page 94 Rear Brake pad Wear indicator mark indicator mark Check the wear indicator mark on each pad. If either pad is worn to the wear indicator mark. Replace both pads as set. Visit Royal Enfield Dealer for this service. Royal Enfield Scram 411...
  • Page 95 Disconnect both the battery Ensure the ignition switch and terminals wires( negative first engine stop switch are in "OFF" and positive next respectively). position. Take out the battery. Royal Enfield Scram 411 93...
  • Page 96 (sealed Next, connect the black wire to the negative terminal of the type). battery. Your battery is a maintenance free type and can be permanently damaged if the cap strip is removed. Royal Enfield Scram 411...
  • Page 97 If the motorcycle is being used very rarely or sparingly and the terminals are not disconnected the battery is bound to lose its charge and result in a dead battery. Royal Enfield Scram 411 95...
  • Page 98 Always hold the bulb with clean dry cloth Gently pullout the headlamp rim along during handling. with reflector assembly. Dont disturb the vent cap provided in the inner body mould. Disconnect head lamp coupler. Royal Enfield Scram 411...
  • Page 99 Assemble the 2 screws and tighten firmly. pipe is facing downwards. Refit the headlamp assembly and ensure the third mounting hole in the bottom of the housing is aligned with the bracket slot. Royal Enfield Scram 411 97...
  • Page 100 Remove the tail lamp cover by loosen the nuts. Remove the outer lens and reflector safely by unscrewing its mounting screw Hold the bulb, press inside and rotate anticlockwise to remove the tail light bulb from its holder. Royal Enfield Scram 411...
  • Page 101 In the event of failure, the entire license plate illuminator holder. assembly should be replaced. Push the bulb and turn clockwise Contact an authorised Royal Enfield Dealer/Service Centre direction to lock the bulb in the to replace the same. holder. Refit the bulb holder by turning to clockwise direction.
  • Page 102 Replace the required fuse with the spare fuse available in the fuse carrier. The blade fuses are located in the carrier. NOTE Please ensure to replace a spare fuse in the holder at the earliest opportunity. FO-Main Fuse-40A Spare Fuse-40A Royal Enfield Scram 411...
  • Page 103 -15 A-Instrument Cluster/Trafficator/Stop lamp/Horn/Tripper unit F6- Lighting Fuse -15 A-Headlamp Low & High Beam. Front Position Lamp. Rear Position Lamp & License Plate llluminator. Please ensure to replace a spare fuse in the holder at the earliest opportunity. Royal Enfield Scram 411 101...
  • Page 104 Usage of fuses other than specified rating will damage the complete electrical system. Any attempt to jumper a defective fuse gives rise to the risk of a short-circuit and fire. Always replace a defective fuse with a new fuse of the same rating. Royal Enfield Scram 411...

  • Page 105: Long Trip Precautions

    CHECKS PRIOR TO THE COMMENCEMENT OF LONG ITEMS TO BE CARRIED JOURNEY Tool kit. Service the motorcycle at a Royal Enfield Authorised First aid kit. Dealer/Service Centre. Bulbs for headlight, trafficator light, Fuse. Ensure sufficient quantity of petrol in the fuel tank for the Accelerator, clutch cables.

  • Page 106: Shock Absorber

    To increase spring preload, turn preload adjuster in the clockwise direction. REDUCING THE PRELOAD To decrease the spring preload, turn preload adjuster in the anticlockwise direction. CAUTION Adjuster It is recommended to visit authorised dealer for adjusting spring Reduce Increase preload and shock absorber settings. Royal Enfield Scram 411...

  • Page 107: Off Roading

    Check for any damages or clog in air filter and replace if Apply the brakes in good time until the brakes have been required. cleaned. RIMS It is recommended to check the rims & wheels for damage after off roading. Royal Enfield Scram 411 105...

  • Page 108: Washing Procedure

    & swing arm bushes to be washed in spray mode only (not in jet mode). Royal Enfield Scram 411...
  • Page 109 Please clean/wipe out water spils completely inside the RH side panel before keeping tool kit, first aid kit and other relevant documents inside the right side panel. Royal Enfield Scram 411 107...

  • Page 110: Storage Precautions

    Set the motorcycle on its center stand. Apply anti rust solutions on all plated parts. Take care not to Get the motorcycle serviced through a Royal Enfield apply this solution on rubber or painted parts. Authorised Dealer/Service Centre.

  • Page 111: Wiring Diagram

    DISCLAIMER It is recommended that the wiring circuit repair and any other electrical rework should be performed only by an authorized Royal Enfield Service Centre, failure to adhere this may cause damage to electrical systems and render the warranty of the products as void.

  • Page 112: Troubleshooting

    We have listed below a few basic checks in case your motorcycle is not functioning. If in case the problem is not rectified after these checks, it is necessary to get the motorcycle checked by a Royal Enfield Authorised Dealer/Service Centre to rectify the problem and to ensure trouble free performance.
  • Page 113 Connection issue with spark plug, cap, high Reconnect spark plug, cap and high tension cable not start tension cable Engine starts but shuts If the MIL lamp in cluster is glowing Contact authorised service center off immediately Royal Enfield Scram 411 111...
  • Page 114 TROUBLESHOOTING Symptom Observations Check for/Remedy Contact authorised service center If any adulteration/water in fuel Engine misfires & runs erratically/ stops If the engine is too hot Switch “OFF” the engine and allow it to cool down Royal Enfield Scram 411...
  • Page 115 If engine RPM raises disproportionately to the Adjust the clutch free play and contact Poor pickup vehicle speed authorised service center ABS (Anti lock braking If the ABS lamp is continuously ON Contact Authorised Service Centre system) Royal Enfield Scram 411 113...

  • Page 116: Warranty Terms & Conditions

    In order to effect warranty, it is a prerequisite that the maintenance schedule prescribed by Royal Enfield in this Owner’s Manual and warranty repairs if any, has been carried out at the authorised distributor’s service facility or at their authorised dealership’s service facility.
  • Page 117 Claims on proprietary items like tires, tubes, spark plug, battery etc., should be taken up with the respective manufacturer or their authorised agents in the area directly by the customer. Royal Enfield (RE) shall not be liable in any manner to replace them through their dealers.
  • Page 118 10. Royal Enfield (RE) reserves the right to finally decide on all warranty claims. Royal Enfield (RE) reserves the right to make changes in design of the motorcycle without any obligation to install these changes on previously supplied motorcycles.

  • Page 119: Emission Control System Warranty

    If any emission related part on your motorcycle is defective, the part motorcycle for the periods of time listed below provided will be repaired or replaced by Royal Enfield Motor Company. This is there has been no abuse, unapproved modification, neglect or your emission control system defects warranty.
  • Page 120 ADDITIONAL WARRANTY TERMS You are responsible for presenting your motorcycle to an authorized Royal Enfield Dealer as soon as a problem exists. The The warranty period starts the date the motorcycle is delivered to warranty repairs should be completed in a reasonable amount of the ultimate purchaser or, if the motorcycle is placed in service as a time, not to exceed 30 days.
  • Page 121 Enfield parts are warranted by their the repairs are covered under this emission warranty. Royal manufacturer to be equal in quality to Genuine Royal Enfield parts Enfield's parts reimbursement, however, will not exceed our in both performance and durability. The use of non-Royal Enfield...
  • Page 122 Damage resulting from accident, acts of nature or other events beyond the (non-cosmetic failures only), leaks, fuel vapor separator, fuel control of Royal Enfield. cap, If used on the above: hoses, clamps, fittings, tubing, sealing gaskets and mounting hardware. Royal Enfield Scram 411...
  • Page 123 Repairs and services performed by anyone other than an authorized Royal Enfield Dealer(Except in case of emergency as defined above). Loss of time, inconvenience, loss of use of the motorcycle, towing of the vehicle, or commercial loss and/or consequential damages.

  • Page 124: Noise Control System Warranty

    California.) The following items are not covered by the noise control system Royal Enfield motors warrants the first owner and each warranty : Failures which may arise as a result of misuse, alterations,...
  • Page 125 Royal Enfield Service Dealer and using only genuine Royal Enfield spare parts. Repairs to the noise control system may be performed by any...

  • Page 126: Evaporative Emission Control System Warranty

    EMISSION CONTROL SYSTEM WARRANTY: Failures which may arise as a result of misuse, alterations, Royal Enfield motors warrants the first owner and each accidents or non performance of routine maintenance, as subsequent owner, that this motorcycle is designed and built specified in the Owner’s Manual.
  • Page 127 Royal Enfield supplied parts is permissible, only if such agency or individuals and the non genuine distance covered cannot be determined.

  • Page 128: Environment Care

    BATTERY You’ve ridden through some beautiful places on your Royal If your Royal Enfield’s battery needs to be replaced, hand it over to Enfield. Won’t you like to keep them that way? Here are some an authorised recycling agent or Royal Enfield Service Centre. They...
  • Page 129 CLEANING YOUR ROYAL ENFIELD Avoid aerosol sprays; instead, use a biodegradable detergent or dry wash to wash your Royal Enfield. Also, be cautious while discarding the cleaning solvents. Hand them over to an authorised recycling agent or a Royal Enfield service centre.

  • Page 130: Radio Type Approval

    FCC § 15.21 Information to user television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Royal Enfield Scram 411...
  • Page 131 Consult the dealer or an experienced radio/TV technician for help. RF Exposure Requirements To comply with FCC RF exposure compliance requirements, the device must be installed to provide a separation distance of atleast 20 cm from all persons. Royal Enfield Scram 411 129...

  • Page 132: Service Maintenance Record

    SERVICE MAINTENANCE RECORD S.No. Date Job Card No. KMS/Miles Brief details of work / service Royal Enfield authorised dealer Royal Enfield Scram 411...

  • Page 133: Notes

    NOTES Royal Enfield Scram 411 131...
  • Page 134 NOTES Royal Enfield Scram 411...
  • Page 136 Part No. RAM00466/A WWW.ROYALENFIELD.COM Edition: October 2022...

Table of Contents

Save PDF