Gear Shifting, Ridings & Stopping - Royal Enfield SCRAM 411 Owner's Manual

GEAR SHIFTING, RIDING & STOPPING
1. Warm up engine for 2 min - until
idling is consistent.
Gear Shift Pattern
1-N-2-3-4-5
2. Press clutch lever towards the
hand grip.
3. Press gear pedal with toe to
engage 1 gear.
st
4. Gently open throttle and release
clutch simultaneously. If clutch is
released suddenly, the engine will
stall and cause a jerky start.
5. Lift gear lever with toe to engage
2 and subsequent gears.
nd
CAUTION
The clutch must be fully disengaged before attempting a gear
shift. Failure to fully disengage the clutch will cause a jerky start
or stalling the engine besides causing damage to transmission
parts.
72 Royal Enfield Scram 411
NOTE
1. Always start the engine with gear in neutral position.
2. Always move the motorcycle in 1st gear position only.
3. The Motorcycle may begin to slow down and show lack of
power while climbing steep hills. In that case, you should shift
to a lower gear so that engine will be operating in normal
power range which will prevent the motorcycle from losing
momentum. The engine may be used for braking by shifting to a
lower gear while riding down to steep hill.
Shift Gears
1 - 2
st nd
2 - 3
nd rd
Up Shift
3 - 4
rd th
4 - 5
th th
5 - 4
th th
Down
4 - 3
th rd
3 - 2
Shift
rd nd
2 - 1
nd st
Vehicle Speed
kmph mph
20 12.4
35 21.7
45 28.0
55 34.2
47 29.2
37 23.0
25 15.5
18 11.2