Page 2
Royal Enfield Support 1800 - 210 - 0007 Roadside Assistance Product Update Feedback Dealer Locator To access dealer details scan the QR code RoyalenfieldSupport support@royalenfield.com www.royalenfield.com Download the ROYAL ENFIELD APP and explore more...
Page 3
For support and information, please call 1800 210 0007 anytime between 9 AM - 9 PM, any day of the week. —Team Royal Enfield...
Mobile : Email : Licence No. Valid till : Model Color : Engine No. VIN. No. Rear: Tyre Make Front : Rear: Tyre Nos. Front : Battery No : Battery make Sold by Date of Sale Royal Enfield Scram 411...
Page 9
Rear ....32 psi/ 2.25 kg/cm Brake system..Dual channel ABS With pillion Front disc..300 mm Dia disc. Front ....27 psi/ 1.89 kg/cm Rear disc ... 240 mm Dia disc. Rear ....34 psi/ 2.39 kg/cm Royal Enfield Scram 411...
Page 10
Battery ......12 volt, 8 Ah VRLA * The above values are approximate and the actual capacity Head lamp ....12 V, H4-60/55 W - BULB will vary with each fuel tank. Tail lamp/ Brake lamp.. 12 V - 4/1 W LED Royal Enfield Scram 411...
Page 11
Using bulbs/electrical gadgets other than specified rating will lead to overloading/erratic behaviour/premature failure of electrical system. Speedometer lamp.....12 V -LED Modifications or fitments which are not approved by Royal Enfield, Hi beam indicator ......12 V - LED will seriously affect the performance of the vehicle and will render Neutral lamp telltale ....12 V - LED...
Page 12
In view of continuous improvements being done on our motorcycles, the specifications are subject to change without prior notice. Do not use the vehicle beyond the allowed gross weight. The suspension and tyres are designed to perform only to the maximum gross vehicle weight. Royal Enfield Scram 411...
Oil level should be up to “MAX” level. Do not overfill as it will affect the clutch functioning. CAUTION Using non recommended/In-correct oils, can cause serious damage to the moving parts, affect performance of the motorcycle and void the warranty. NOTE Recommendation subject to change without notice. Royal Enfield Scram 411...
This message if disregarded will result in damage to the motorcycle. NOTE Indicates important and useful messages for clearer understanding. All images shown in subsequent pages are for reference to explain and need not to be exactly the same on the model you own. Royal Enfield Scram 411...
Engine Capacity Model (Scram 411) Transmission type Type of Fuel System Place of Manufacturing (1-Oragadam, 2-Vallam Vadagal) Year of Manufacturing (L:2020 , M:2021 , N:2022) Month Of Manufacturing (A-Jan., H-Aug., K-Sep., N-Dec.) Production serial no. Royal Enfield Scram 411 13...
Page 16
ENGINE NUMBER Type of cooling Type of transmission Fuel feed Manufacturing plant (0-TVT. 1-0RG) Year of manufacture (2021 , M, 2022 , N, 2023 , P) Month of manufacture (A-Jan., H-Aug., K-Sep., N-Dec.) Production serial number Royal Enfield Scram 411...
6. Ignition key 7. Tripper 8. Engine kill switch 9. Info button (Which is available in the RH switch module) 10. Rear view mirror right side 11. Electric start switch 12. Hazard switch 13. Fuel tank cap Royal Enfield Scram 411 15...
Page 18
LOCATION OF KEY PARTS 1. Front trafficator right side 2. Horn 3. Oil level window 4. Rear brake pedal 5. Rider foot rest right side 6. ABS module 7. Pillion foot rest right side 8. Rear trafficator right side Royal Enfield Scram 411...
Page 19
3. Canister 4. Pillion foot rest left side 5. Tail lamp 6. Rear trafficator left side 7. Licence plate illuminator 8. Center stand 9. Gear change lever 10. Rider foot rest left side 11. Side stand Royal Enfield Scram 411 17...
Insert key, turn clockwise to ignition “OFF” position. If users, besides causing severe damage to the motorcycle. required, gently shake handle bar to help unlock steering easily. Royal Enfield Scram 411...
Page 21
Petrol is highly explosive. Please ensure there are no open flames Key cannot be removed when fuel tank cap is open. or sparks nearby while refueling and fill fuel tank only in a well ventilated area. Royal Enfield Scram 411 19...
Page 22
Anti splash plate NOTE Key can be removed only if ignition is in “OFF” or steering is locked. Fuel Filler Collar Anti - Splash Plate Maximum Fuel Level Royal Enfield Scram 411...
Page 23
5 seconds. both rider and other road users, besides causing severe damage to the motorcycle. ENGINE STOP SWITCH Engine “OFF” HAZARD LIGHT SWITCH Engine “ON” Hazard light “ON” Royal Enfield Scram 411 21...
Page 24
DAY FLASH Press the switch to operate high beam filament in head light. It is giving indication to vehicle coming from opposite side while overtaking. Royal Enfield Scram 411...
Page 25
SEAT pulling out gently. Locate key on left side & turn When washing the motorcycle, be clock wise, lift the seat and careful not to flood this area with remove. water. Royal Enfield Scram 411 23...
Page 26
Clock settings and TRIP A/B reset in the Cluster.. A. LCD Sequence (Info switch press <1 sec.) :- If Trip F enabled TRIP1 TRIP2 TRIP1 TRIP2 TRIPF NOTE For trip re-set press info button for T>3 sec. ■ Royal Enfield Scram 411...
Page 27
ODO TRIP F AB 00000.8 miles DISCLAIMER : Cluster unit display may look dull during sun overhead conditions this is normal and due to impact of direct sunlight on the unit customers to refer during other riding conditions. Royal Enfield Scram 411 25...
Page 28
ODO TRIP F AB 00000.8 00000.8 miles miles 1. Clock Display in 12 hour format with AM/ PM indication. 2. Service reminder Will reset to l2:00 AM when 3. Odometer battery is disconnected. 4. Trip value (A/B & F) Royal Enfield Scram 411...
Page 29
Toggle between AM or PM INFO T>3 sec INFO Save data and exit clock setting mode NOTE: In case no action is observed between clock setting function for more than 20 sec last shown value to be displayed. Royal Enfield Scram 411 27...
Page 30
00.00 GEAR i) 1 service - 450 km ODO TRIP F AB 00000.8 ii) 2 service - 4,900 km miles iii) From there on for every 5,000 km from previous value (ex: 9,900. 14,900 etc.) Royal Enfield Scram 411...
Page 31
INFO 0.2<T<1 In ignition key "ON" ODO >Trip A INFO 0.2<T<1 Trip A> trip B TRIP A Reset Trip A INFO T>3 INFO 0.2<T<1 Trip B> Trip F/ODO TRIP B INFO T>3 Reset Trip B Royal Enfield Scram 411 29...
Page 32
LCD. It is recommended not to ride vehicle Fuel indication will vary on rough road, uphill and downhill conditions, in these condition as it will result in fuel pump damage. for accurate indication refer during slow speed or flat surfaces. Royal Enfield Scram 411...
Page 33
Never attempt to operate the info buttons while riding the motorcycle. Doing so will cause loss of concentration and unstable riding, leading to a potential accident resulting in serious injury to both rider and other road users, besides causing severe damage to the motorcycle. Royal Enfield Scram 411 31...
Page 34
ECU & blinking along with low fuel tell Sensors. Please visit the nearest authorised Royal Enfield dealer tale “ON” for low fuel condition. to diagnose & rectify the defect in the EMS.
Page 35
Failure to do so will cause the motorcycle to run out of fuel and get stranded in addition to causing serious damage to the fuel pump. CAUTION Do not run motorcycle incase the ABS Indicator lamp continuously "ON". Royal Enfield Scram 411 33...
Page 36
Tripper is being provided to have turn by turn navigation on motorcycle to help riders to have a hassle free riding without handling the smartphones, This device works based on bluetooth connectivity with navigation search based on RE Mobile app with the support of Google Maps. Royal Enfield Scram 411...
Page 37
Primary direction or next turn the unit customers to refer during other riding conditions. Secondary directionor next to next turn Distance to next turn Royal Enfield Scram 411 35...
Page 38
Connectivity control only through RE Mobile app. the display will be blank in this region. Distance to destination or ETA: Shows the total distance to destination or Estimated Time of Arrival (based on user selection from RE Mobile app). Royal Enfield Scram 411...
Page 39
RE logo SW version helmet google paired mode tripper will show clock Clock a) lf no connection is established. b) If connection is established but no navigation input is observed. c) Once destination is reached. Royal Enfield Scram 411 37...
Page 40
For first time pairing user needs to enter the secured pin shown on tripper through RE Mobile app to setup the device, after that auto-pairing will happen if same device is connected. Royal Enfield Scram 411...
Page 41
4G band compared to other setting of smartphone for navigation to work in low battery lower versions. mode. 13. Calibrate mobile phones frequently for more gps accuracy & location accuracy is dependent on. Royal Enfield Scram 411 39...
Free movement of handle bar to left and right sides. 10. All electrical controls horn working correctly head lamp, tail lamps, brake lamps and indicator lamps working correctly. Royal Enfield Scram 411...
Use extra caution licensed riders and are thoroughly familiar with the operating when approaching and passing through intersections conditions of your motorcycle. Royal Enfield Scram 411 41...
Page 44
Always wear protective clothing that covers your legs, ankles and feet. The engine or exhaust system become very hot during or after operation and can cause burns. Royal Enfield Scram 411...
Page 45
Please use utmost caution while applying brakes, especially Do not place the foot on the brake pedal while riding unless braking while riding under wet or bad road conditions. is required. Because this will lead to premature wear of brake pad. Royal Enfield Scram 411 43...
Please park the motorcycle only in a well ventilated area and do not Do not carry excessively heavy or huge cargo on the stay in the same place where the motorcycle is parked. motorcycle. Royal Enfield Scram 411...
Page 47
Do not attach a trailer to the motorcycle attaching a trailer can cause loss of control on the motorcycle, leading to a potential accident, resulting in serious injury to both rider and other road users, besides causing severe damage to the motorcycle. Royal Enfield Scram 411 45...
A moving line of traffic Keep to the correct side of the road center line when always has the right-of-way. meeting oncoming vehicle. Royal Enfield Scram 411...
Page 49
Use care when judging the size or distance of vehicles/objects behind your motorcycle is seen clearly with reference to your riding seen in these mirrors. posture. Royal Enfield Scram 411 47...
Avoid full throttle operation and do not ride at constant throttle continuously. Vary the speed by 10% while riding. 60 kmph 80 kmph Avoid sudden accelerations and racing starts. Avoid prolonged full-throttle operation. Vary speed occasionally. Royal Enfield Scram 411...
It is recommended to take the motorcycle to moderator to momentarily and continuously reduce the hydraulic a nearest Royal Enfield Authorized service station for a detailed pressure and thereby prevent the brakes from locking the wheels inspection and correction of the EFI system.
Page 52
“ON” the ignition and stop switch again, nearest authorized Royal Enfield Distributor. Failure to do so can to start the engine. result in a serious injuries and loss of life.
Page 53
Please apply both brakes to stop- front brake momentarily earlier followed by rear brake. To have better traction and control of the motorcycle. Royal Enfield Scram 411 51...
Page 54
Do not apply only the front or rear brakes it can lead to ■ In the event of the ABS indicator remaining continuously "ON" ■ inefficient braking. please take the motorcycle to a nearest authorized Royal Enfield service station to inspect the brakes system control of the vehicle. Royal Enfield Scram 411...
Depress clutch lever fully. for more than 5 min when the engine is in idle condition, which Press starter button and hold till will cause damage to the engine internal parts and exhaust system as well. engine starts. Royal Enfield Scram 411 53...
CAUTION The clutch must be fully disengaged before attempting a gear shift. Failure to fully disengage the clutch will cause a jerky start or stalling the engine besides causing damage to transmission parts. Royal Enfield Scram 411...
The and fuel) when gear is engaged. side stand or frame will become damaged and the motorcycle will b) Engine will not start if gear is engaged already. fall over. Royal Enfield Scram 411 55...
& electronic parts replaced on your vehicle are to be disposed off in a proper way without polluting the environment. When your vehicle is attended in a Royal Enfield workshop our dealers do take care of that aspect. If you are getting it attended elsewhere please ensure that items are segregated and kept in a suitable container or bag without allowing them to get into soil, water or sewerage line, drains, water bodies like lake, canal, river, sea etc.
Page 60
10. Do not apply any corrosive solvent on painted surfaces or Cover the silencer tail pipe, horn and control switches with rubber parts. suitable plastic bags and tie it firmly to prevent water entry. Royal Enfield Scram 411...
If in case the motorcycle is used frequently in very dusty environment/ severe climatic conditions/ poor roads/ stagnant water etc., the maintenance will need to be done earlier as will be required. Contact a nearest Royal Enfield Authorised Dealer/ Service Centre to carry outthe periodical maintenance and for any expert advice. S I .
Page 62
Check for screw tightness in all services Air filter element Clean/ Replace more frequently if motorcycle always used in dusty/ off Road conditions. l&A l&A l&A l&A l&A l&A l&A l&A l&A l&A l&A Accelerator cable Royal Enfield Scram 411...
Page 63
Usage of throttle body cleaners or any similar solvent or alcohol based liquids for Throttle body cleaning is strictly prohibited. Throttle body cleaning every lO,OOO km /12 months or earlier as required. l&A l&A l&A l/A/R l/A/R l/A/R l/A/R l/A/R l/A/R l/A/R Clutch cable l&A Royal Enfield Scram 411 61...
Page 64
Front fork oil Rear wheel drive chain# l & A Clean, Lubricate & adjust every 1000 km or earlier as required Battery terminals (apply petroleum jelly) Earth wire eyelet tightness Hydraulic brake fluid - front & rear# Royal Enfield Scram 411...
Page 65
Spokes tightness/wheel rim run out front & rear# Front & Rear wheel bearings for play# l&R l&R Inspect & If required lubricate for every 5,000 km or earlier as required. Swingarm pivot bearings# Replace if necessary Royal Enfield Scram 411 63...
Page 66
Hand levers, center stand, side stand, rider & pillion foot rest pivots Lubricate every 1,000 km or earlier as required & gear shift levers # Cam chain / chain pads / auto chain I&R tensioner Royal Enfield Scram 411...
Page 67
# Service more frequently when riding in rain or at full throttle. #(1) Tyre to be replaced if the tyre wear identification mark reached (2) To be done at authorised Royal Enfield Dealer/ Service Center. For maintenance after 50,000 km. please repeat same frequency specified above. in consultation with a Royal Enfield Authorised Dealer/ Service Centre.
17 • 13 mm Combination Ring To loosen / tighten wheel spanner 24 • 14 mm mm axle nuts D.E. spanner 10 • 12 mm To loosen/ tighten hex nuts Tool wallet For storing tools Royal Enfield Scram 411...
Gauze bandage 5 cm x 2 cm Sterilized gauze swab 5 cm x 5 cm Sterilized elastic plaster 7 cm x 6 cm Elastic gauze bandage 8 cm x 1 mtr. First aid kit pouch Royal Enfield Scram 411 67...
Lubricate the center stand pivot or feel it is best done by an experienced person, we recommend periodically for smoother operation you to get in touch with a Royal Enfield Authorised Dealer/ of center stand. Service Centre. HAND LEVER PIVOTS Wipe the area free of dirt/grease.
Page 71
Make sure the spark plug, spark plug cap and HT cable are engine oil. proper fitment. CAUTION Using non-recommended/in-correct oils, can cause serious damage to the moving parts, affect performance of the motorcycle and void the warranty. Royal Enfield Scram 411 69...
Page 72
In the event of a spill, please clean the area Solo 1.75 kg/cm (25 psi) 2.25 kg/cm (32 psi) immediately with a soft cloth (preferably a wet cloth) to avoid With Pillion 1.89 kg/cm (27 psi) 2.39 kg/cm (34 psi) damage. Royal Enfield Scram 411...
Page 73
Place a suitable spacer of 4 mm thickness, Loosen pinch bolt on right fork end between the brake pads to avoid with 6 mm allen key. accidental compression of the brake lever. Royal Enfield Scram 411 71...
Page 74
Insert wheel spindle from right fork end. Ensure the position of RH side collar & disc side spacer aligned properly. Holds spindle on right side, locate washer and nut on spindle on left side and tighten firmly. Royal Enfield Scram 411...
Page 75
Place a suitable spacer of 4 mm thickness, between the brake pads to avoid accidental compression of the brake lever. Royal Enfield Scram 411 73...
Page 76
Position the respective spacers on the left and right Fix the brake hose pipe in swing arm clips properly. side of the wheel hub. Ensure the axle mounting hole in the swing arm, wheel hub and caliper bracket are aligned. Royal Enfield Scram 411...
Page 77
Rotate wheel slowly and check chain free play at the top run to Measure the drive chain free play on the top run of the be between 20- 30 mm. chain. The recommended free play is 20 to 30 mm. Royal Enfield Scram 411 75...
Page 78
& rear chain as a kit. arm. Tighten the lock nuts against the adjuster nuts,taking care not to disturb the adjuster nut settings. Tighten rear wheel spindle nut to a specified torque. Royal Enfield Scram 411...
Page 79
Check free play 2 to 3 mm at clutch lever pivot on handle After adjustment tighten the lock nut in master cylinder push bar end. rod assembly. Tighten lock nut (A) after adjustment is done. Royal Enfield Scram 411 77...
Page 80
Rear Brake pad Wear indicator mark indicator mark Check the wear indicator mark on each pad. If either pad is worn to the wear indicator mark. Replace both pads as set.Visit royal enfield dealer for this service. Royal Enfield Scram 411...
Page 81
Take out the battery. ventilated area. Ensure the ignition switch and engine stop switch are in "OFF" position. Remove the side panel on the right side by unscrewing the hex socket button head screws. Royal Enfield Scram 411 79...
Page 82
Next, connect the black wire to the negative terminal of the Your battery is a maintenance free type and can be permanently battery. damaged if the cap strip is removed. Smear the terminals with petroleum jelly. (Do not use grease in the battery terminals). Royal Enfield Scram 411...
Page 83
If the motorcycle is being used a battery explosion which could result in serious injury. very rarely or sparingly and the terminals are not disconnected the battery is bound to lose its charge and result in a dead battery. Royal Enfield Scram 411 81...
Page 84
Always hold the bulb with clean dry cloth during handling. Gently pullout the headlamp rim Do not disturb the vent cap provided in along with reflector assembly. the inner body mould. Royal Enfield Scram 411...
Page 85
Connect head lamp coupler on the bulb terminals correctly. Royal Enfield Scram 411 83...
Page 86
"OFF" position when replacing the bulbs, fuses and electrical parts. TRAFFICATOR BULB REPLACEMENT Remove the screw from the trafficator housing back side. Remove outer lens. Remove the fused bulb by pushing and turning in anticlockwise direction. Royal Enfield Scram 411...
Page 87
Open the fuse carrier lid & replace fuse as indicated inside License Plate llluminator. the lid. Please ensure to replace a spare fuse in the holder at the earliest Replace the required fuse with the spare fuse available in the fuse carrier. opportunity. Royal Enfield Scram 411 85...
Page 88
Not doing this can result into repeated fuse failures. Usage of fuses other than specified rating will damage the complete electrical system. Any attempt to jumper a defective fuse gives rise to the risk of a short-circuit and fire. Always replace a defective fuse with a new fuse of the same rating. Royal Enfield Scram 411...
CHECKS PRIOR TO THE COMMENCEMENT OF LONG ITEMS TO BE CARRIED JOURNEY Tool kit. Service the motorcycle at a Royal Enfield Authorised Bulbs for headlight, trafficator light, fuse. Dealer/Service centre. Accelerator, clutch cables. Ensure sufficient quantity of petrol in the fuel tank for the Rear chain master link lock assembly.
REDUCING THE PRELOAD To decrease the spring preload, turn preload adjuster in the anti- clockwise direction. CAUTION Adjuster It is recommended to visit Authorised Dealer for adjusting spring Reduce Increase preload and shock absorber settings. Royal Enfield Scram 411...
Check for any damages or clog in air filter and replace if Apply the brakes in good time until the brakes have been required. cleaned. RIMS It is recommended to check the rims & wheels for damage after off roading. Royal Enfield Scram 411 89...
& swing arm bushes to be washed in spray mode only (not in jet mode). Royal Enfield Scram 411...
Page 93
Please clean/wipe out water spils completely inside the RH side panel before keeping tool kit, first aid kit and other relevant documents inside the right side panel. Royal Enfield Scram 411 91...
10. Store motorcycle in a clean covered area free of moisture and Get the motorcycle serviced through a Royal Enfield dust. Authorised Dealer/ Service Centre.
We have listed below a few basic checks in case your motorcycle is not functioning. If in case the problem is not rectified after these checks, it is necessary to get the motorcycle checked by a Royal Enfield Authorised Dealer/ Service Centre to rectify the problem and to ensure trouble free performance.
Page 96
Connection issue with spark plug, cap, high Reconnect spark plug, cap and high tension cable Engine does not start tension cable Engine starts but shuts If the MIL lamp in cluster is glowing Contact Authorised service center off immediately Royal Enfield Scram 411...
Page 97
TROUBLESHOOTING Symptom Observations Check for/Remedy Contact Authorised service center If any adulteration/water in fuel Engine misfires & runs erratically/stops If the engine is too hot Switch “OFF” the engine and allow it to cool down Royal Enfield Scram 411 95...
Page 98
If engine RPM raises disproportionately to the Adjust the clutch free play and contact Poor pickup vehicle speed Authorised service center ABS (Anti lock If the ABS lamp is continuously "ON" Contact Authorised service center braking system) Royal Enfield Scram 411...
In order to avail warranty benefits by second or subsequent owner the second/subsequent owner should inform the nearest Royal Enfield Service Centre about the purchase of the bike and shall fill in the requisite details in the form as requested by Royal Enfield.
Page 100
(h) Warranty is not applicable for discoloration of exhaust pipe & silencer, as it is a natural process that will happen during usage. (i) Defects arising from fitment of unauthorised or additional electrical loads. (j) Motorcycle serviced or repaired at unauthorised service centres. Royal Enfield Scram 411...
Page 101
(m) Normal maintenance operations like adjustment of brakes, cleaning fuel system, engine tune-up and other such adjustments. (n) Oxidization of buffed/painted/powder coated items etc. Use only Royal Enfield approved parts and accessories. Use of certain other manufacturer's performance parts will avoid your new motorcycle warranty.
Royal Enfield and/or our Authorised Service Centre and results of such examination will be final and binding. If on examination the warranty conditions of the part/s is/are not established, Royal Enfield will have the right to charge all, or part of the cost of such examination to the customer in addition to the cost of the components.
Page 103
Royal Enfield and/or their Authorised Service Centre. Royal Enfield will not be responsible for any penalties that may be charged by statutory authorities on account of failure to comply with the in-use emission standards.
Page 104
Under all circumstances uses lubricants and fuel as recommended by Royal Enfield. Regularly obtains and carries out maintenance in accordance with Royal Enfield guidelines and enters the details in the log book. Immediately approaches the nearest RE Authorised Dealer/Service centre upon discovery of failure to comply with the emission standard inspite of having maintained and used the motorcycle in accordance with the instructions in the owner's manual and having carried out such repairs and adjustments as may be required with a view to establish such compliance.
Page 105
The motorcycle has been run on adulterated/leaded fuel or lubricant other than those specified by Royal Enfield in the Owner's manual or any other document given to the customer at the time of sale of the motorcycle.
Page 106
Always carry a valid "Pollution Under Control" certificate with you, as and if applicable by law. TIPS TO REDUCE POLLUTION Ensure that the periodical maintenance is carried out as stipulated in the owner's manual through a Royal Enfield Authorised Service Centre.
30,000 km/ 36 Months *Labour is free for this services alone NOTE Cost of parts,lubricants,filters and other consumables are chargeable to the customer on their respective service activities. Refer the periodic maintenance chart for the respective service activities. Royal Enfield Scram 411 105...