Royal Enfield SCRAM 411 Owner's Manual page 90

MINOR MAINTENANCE TIPS
REAR WHEEL REASSEMBLY
1. Ensure the cush rubbers are in
place in the wheel hub.
2. Insert the wheel assembly
between the swing arms and
position the cush rubers on the
rear sprocket lugs correctly.
3. Remove the spacer between
the brake pads and locate the
caliper such that the brake disc
is between the brake pads.
4. Locate the caliper bracket slot
on the lug in the swing arm.
5. Position the respective spacers on the left and right
side of the wheel hub.
6. Ensure the axle mounting hole in the swing arm, wheel hub
and caliper bracket are aligned.
88 Royal Enfield Scram 411
7. Insert the wheel axle from the left side of the swing
arm and gently tap it in.
CAUTION
1. Do not force the spindle through
as it will cause damage to the
threaded end.
2. Ensure correct chain tension and
rear wheel alignment with front
wheel by adjusting the adjusters
on both left and right side of swing
arm.
3. Assemble washer and wheel axle
nut on right side and tighten to
correct torque.
4. Fix the brake hose pipe in swing
arm clips properly