Table of Contents
Advertisement
ETC User Quick Guide
QuickTouch+Mk2 Rigging Controller
Quick Trims
QT+ MK2 6CH/12CH
1. Use the Up
2. Press the [Clear] button to deselect all motors.
3. Press and release the [Trim/Menu] button. The LCD screen instructs you to hold motor select
buttons.
4. Press and hold the select buttons for all desired motors for 5 seconds. The LEDs for those
motors will blink white during this time and a countdown displays on the LCD screen.
QT+ MK2 1CH
Record the Trim
1. Use the Up
2. Press and hold the [Speed/Menu] button for 5 seconds. A countdown displays on the
LCD screen.
3. After 5 seconds, release the [Speed/Menu] button and the current position is stored as the
trim.
QuickTouch+Mk2 Rigging Controller
and Down
buttons to
or Down
button to
Page 2 of 2
move motors
to their prospective Trim 2 positions.
move the motor
to the prospective trim position.
ETC
Advertisement
Table of Contents
Need help?
Do you have a question about the QuickTouch+ Mk2 and is the answer not in the manual?