Adjusts the MXW1X backchannel audio volume when a headphone is connected. Also selects between internal and exter
nal microphone.
⑦ Power On/Off (MXW6X)
Press and hold the dedicated power button for 3 seconds to turn the transmitter on or off.
Note: For MXW1X and MXW2X, press and hold the Mute/Active button for 3 seconds to turn the transmitter on or off.
Status LEDs*
Status
Active
Mute
Identify
Initialization/ RF channel
acquisition
Out of RF Coverage
Range
Charging
Off
* Default behavior.
Customize LED behavior
APXD2
Front Panel
① Docking Bays
Connect and charge up to two MXW neXt handheld, bodypack, or boundary microphones.
② Link Button
LED
Description
Green
Ready to pass audio to network.
Red
Audio is muted.
Flashing Yellow
The Identify button has been pressed from the control software.
The transmitter is initializing and acquiring the RF connection to the
linked access point.
Alternating Red and
Green
Standard density mode has a slow alternating rate.
High density mode has a fast alternating rate.
Red Pulsing (short
The transmitter is out of the RF coverage range to the linked access
on/off)
point.
Off
The transmitter is charging.
No connection to the network. The transmitter must be turned on using
Off
the power button on the mic.
from Settings > Lights.
Shure Incorporated
10/41