Advertisement
Quick Links
The Desk You Deserve
ASSEMBLY MANUAL
SPIRIT Series
Video Assembly manual is also available.
Scan the QR code for direct link to the video manual.
!
NOTE: In order to avoid injury or damages,
please do not try to assemble your desk alone.
Our furniture is massive and heavy and requires
at least two people to carry out assembly.
Please assemble on soft surface to avoid
scratches to the lacquer.
www.studiodesk.net
Video manual
NOTE:
We highly recommend following the step by step
video assembly manual.
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for StudioDesk SPIRIT Series
Summary of Contents for StudioDesk SPIRIT Series
- Page 1 The Desk You Deserve www.studiodesk.net Video manual ASSEMBLY MANUAL SPIRIT Series Video Assembly manual is also available. NOTE: Scan the QR code for direct link to the video manual. We highly recommend following the step by step video assembly manual.
- Page 2 The Desk You Deserve Thank you for making StudioDesk your desk of choice! Before beginning assembly of your desk, let’s get familiar with the parts you have received in your package. Please match the corresponding numbers on this page with the drawings.
- Page 3 Step One Step Two Insert the electric motorized leg into the horizontal support and screw it in using 4 x hexagon screws for each leg. Don’t forget to connect the motorized leg to the controller. The controller can also be installed onto the horizontal support.
- Page 4 Step Four Place the U profiles on each side of the main board and screw it to the horizontal support using 4 x hexagon screws for each U profile. Step Five Screw in the U profiles to the main board using 3 x hexagon screws for each U profile.
- Page 5 Step Seven Screw in the 4 x desk glides into each leg. Step Eight Mount the bottom part of the leg and tighten it. Step Nine Also fix the leg from the bottom using 4 x hexagon screws for each leg.
- Page 6 Step Ten Insert 2 x dowels into the pullout sides Step Eleven Mount the pullout sides onto the main board. Step Twelve Fix it using long brackets and 8 x M6 screws for each side. The long brackets allow you to adjust your pullout height.
- Page 7 Step Thirteen Screw in the cable management tray using 3 x M6 screws. Step Fourteen Slightly screw in 2 x confirmat screws into the main board by hand. Note: Not all the way. Step Fifteen Mount the horizontal stabilizer and screw it into the legs using 2 x hexagon screws on each side and place 2 x screws in the middle holes and use nuts to tighten them.
- Page 8 Step Sixteen Organize your three middle pieces together and put 2 x dowels into each side piece and fix all three parts together with 2 x confirmat screws Step Seventeen Flip the desk up right, place the dowels of the middle piece in the main board and screw in the 2 x confirmat screws from the bottom.
- Page 9 Step Nineteen Insert the height controller into the main board and connect it to the motorized leg controller. Step Twenty First: Fix the speaker shelves to the shelf holder using 3 x screw for wood for each shelf. Then mount the shelf holders to the main board using a long screw like shown in the picture..
Need help?
Do you have a question about the SPIRIT Series and is the answer not in the manual?
Questions and answers