Summary of Contents for StudioDesk Enterprise Series
Page 1
The Desk You Deserve www.studiodesk.net ASSEMBLY MANUAL Enterprise Series Video Assembly manual is also available. Search for Enterprise desk - Video assembly manual on the YouTube. NOTE: In order to avoid injury or damages, please do not try to assemble your desk alone.
Page 2
The Desk You Deserve Thank you for making StudioDesk your desk of choice! Before beginning assembly of your desk, let’s get familiar with the parts you have received in your package. Please match the corresponding numbers on this page with the drawings.
Page 3
Step One Insert dowels (12) into the holes as shown on the illustration, fix armrest to the desk surface using screws for wood 20 mm (17). Fix support pieces to the desk surface using screws for wood 40 mm (16). Install rack dividers (3) on the dowels as shown below.
Page 4
Step Five Insert dowels 12 in the left desk leg. Use rubber Hammer if required. Install metal brackets (8) to the leg with M6 screws (10) as shown on the illustration - right. Step Six Carefully place desk surface to dowels and fix it with a metal brackets (8) and M6 screws (10)as shown on the illustration.
Page 5
Install Strengthening boards as shown on the illustration Below using Metal brackets (8) and M6 screws 10. Step Eight Fix the metal bar (must be installed) to the desk surface using M6 Screws and M6 washers. Step Nine Install Right leg (5) on top of the Vertical parts.
Need help?
Do you have a question about the Enterprise Series and is the answer not in the manual?
Questions and answers