Advertisement
Quick Links
The Desk You Deserve
ASSEMBLY MANUAL
BEAT 2.0 Series
Video Assembly manual is also available.
Scan the QR code for direct link to the video manual.
!
NOTE: In order to avoid injury or damages,
please do not try to assemble your desk alone.
Our furniture is massive and heavy and requires
at least two people to carry out assembly.
Please assemble on soft surface to avoid
scratches to the lacquer.
www.studiodesk.net
Video manual
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for StudioDesk BEAT 2.0 Series
Summary of Contents for StudioDesk BEAT 2.0 Series
- Page 1 The Desk You Deserve www.studiodesk.net Video manual ASSEMBLY MANUAL BEAT 2.0 Series Video Assembly manual is also available. Scan the QR code for direct link to the video manual. NOTE: In order to avoid injury or damages, please do not try to assemble your desk alone.
- Page 2 The Desk You Deserve Thank you for making StudioDesk your desk of choice! Before beginning assembly of your desk, let’s get familiar with the parts you have received in your package. Please match the corresponding numbers on this page with the drawings.
- Page 3 Step One Step Two Insert 10 mm dowels (8) to the main desk surface on a both sides. IMPORTANT: Never insert Dowels to the Legs, always to the surfaces! Step Three Insert main desk surface dowels to the dedicated holes on the leg as shown on the picture.
- Page 4 Step Four Fix main surface to the leg using Brackets (5) and M6 Screws x 16 (1) as shown below. Use some help to hold the main desk surface while doing that. Step Five Insert Dowels (12) to the strengthening board on the both sides.
- Page 5 Step Seven Fix the Strengthening board to the leg using brackets (5) and M6x16 (1) screws. Step Eight Fix Strenghtening board to the desk surface using Brackets (5) And M6 x 16 (1) Screws.
- Page 6 Step Nine Insert Dowels (8) to the dividers and fix them to the top shelf as shown on the picture Insert dowels on the sides of the shelf. Install Brackets (5) on the both sides of the shelf using M6 x 16 screws (1) as shown on the picture. Step Ten Fix dividers to the top shelf using brackets (5) And M6x16 screws.
- Page 7 Step Twelve Close the structure with another Leg. As shown on the illustration. Two people are required on this step. Step Thirteen Fix all the parts with the leg Using Brackets (5) and M6x16 Screws (1) as shown on the picture. Step Fourteen Install cable management (3) using M6 x16 screws (1) and Washers (7)
- Page 8 Step Fifteen Install long brackets (9) to the desk surface And fix Pull out verticals using M6x16 (1) Screws. Step Sixteen Install vertical to Pull out board Using Confirmat (4) screws as shown on the picture. Step Seventeen Turn the desk on the standing Position and install Rack rails (10) using M6 x 16 Screws (1)
- Page 9 Step Eighteen Insert pull out board to the sliding Mechanism evenly on the both sides. This step can be tricky therefore We highly recommend you to watch our video manual on our YouTube Channel. QR code is on the first Page of this manual.
Need help?
Do you have a question about the BEAT 2.0 Series and is the answer not in the manual?
Questions and answers