Yardworks 060-0608-2 Operator's Manual page 8

Table of Contents

model no.

060-0608-2

CleARING A ClOGGeD DISCHARGe CHUTe

To clear the chute:

SHUT THE ENGINE OFF!

–

Wait 10 seconds to be sure the impeller blades have stopped rotating.

–

Always use a clean-out tool. DO NOT use your hands.

–

MAINTeNANCe AND STORAGe

The owner/operator is responsible for all periodic maintenance.

–

Complete all scheduled maintenance in a timely manner.

–

Correct any issue before operating the snowblower.

–

Check shear bolts, engine mounted bolts, etc., at frequent intervals for proper tightness

–

to sure the equipment is in safe, working condition.

Never store the machine with fuel in the fuel tank inside a building where ignition

–

sources are present such as hot water heaters, space heaters, clothes dryers or any

open flame sources. Allow the engine to cool before storing in any enclosure.

Always refer to owner's guide instructions for important details if the snowblower is to

–

be stored for an extended period.

Maintain or replace safety and instructions labels, as necessary.

–

Run the snowblower for one minute to clear out packed snow and ice to prevent freeze-

–

up during storage.



WARNING: Hand contact with the rotating impeller inside the discharge

chute is the most common cause of injury associated with snowblowers. Never

use your hand to clean out the discharge chute or auger assembly.



WARNING: Never operate a damaged or defective snowblower.

| contact us: 1.866.523.5218

Table of Contents