Maintenance - Yardworks 060-0608-2 Operator's Manual

Table of Contents

MAINTeNANCe

model no.

060-0608-2

ADJUST THe SKID SHOeS

Tilt the snowblower auger back and place a spacer under the shave plate below the

–

augers that is the height that you want the shave plate to ride above the ground.

Loosen the bolts holding the skid shoes in place and slide the skid shoes down until

–

they contacts the ground.

Re-tighten the skid shoe bolts. (Fig. 32)

–

OIl CHANGe

Drain the engine oil when the engine is warm. Warm oil drains quickly and completely.

1. Turn the fuel valve lever to the OFF position to reduce the possibility of fuel spillage.

2. Place a suitable container below the snowblower to catch the used oil.

| contact us: 1.866.523.5218

Figure 32

Table of Contents