HIKVISION DS-2XS6A87G1-LS/4G User Manual page 47

Day/Night Scheduled-Switch: The system switches day/night mode according to the schedule.
It switches to day mode during the set periods and switches to night mode during the other
periods.
Sensitivity
The higher the value of sensitivity is, the more sensitive the motion detection is. If the
sensitivity is set to 0, motion detection and dynamic analysis do not take effect.
Proportion
It refers to the proportion that a moving object occupies in the drawn area. When the size of
the object exceeds the set proportion, motion detection is triggered.
3. Select an Area and click Draw Area. Click and drag the mouse on the live video, then release the
mouse to finish drawing one area.
Stop Drawing Finish drawing one area.
Clear All
4. Optional: Repeat the above steps to set multiple areas.
Normal Mode
You can set motion detection parameters according to the device default parameters.
Steps
1. Select normal mode in Configuration.
Network Camera User Manual
Figure 6-1 Set Rules
Delete all the areas.
35