Installing The Inner Rails - Supermicro A+ Server AS-2115HS-TNR User Manual

Installing the Inner Rails

Begin the rack mounting procedure by installing the inner rails to the chassis.
1. Identify the left and right inner rails. They are labeled.
2. Place the inner rail firmly against the side of the chassis, aligning the hooks on the side
of the chassis with the holes in the inner rail.
3. Slide the inner rail forward toward the front of the chassis and under the hooks until the
quick release bracket snaps into place, securing the rail to the chassis.
4. Optionally, you can further secure the inner rail to the chassis with a screw.
Warning: Do not pick up the chassis with the front handles. They are designed to pull
the system from a rack only.
Figure 2-3. Installing the Rails
24
Chapter 2: Server Installation