Advertisement
4. Wired Network Configuration
(Windows 10 and Windows 11)
A computer with wired Ethernet connection is required for the first-time
configuration of the Wireless AP.
1. Click the "Start" button located at the lower-left corner of your computer.
2. Select "Control Panel-> Network and Sharing Center".
3. Click "Change adapter settings".
4. Double-click "Local Area Connection".
5. Select "Internet Protocol Version 4 (TCP/IPv4)" and click "Proper-
ties".
6. Select "Use the following IP address" to configure the IP address to
"192.168.1.x" ("x" can be any number from 2 to 254, except 253) and
then click the "OK" button to save the configuration.
6
Advertisement
