Wired Network Configuration (Windows 10 And Windows 11) - Planet Networking & Communication WDAP-C7210E Quick Installation Manual

1200mbps 802.11ac wave 2 dual band ceiling-mount wireless access point

Table of Contents

5. Wired Network Configuration (Windows 10 and

Windows 11)

A computer with wired Ethernet connection is required for the first-time

configuration of the wireless AP.

1. Click the "Start" button located at the lower-left corner of your computer.

2. Click "Control Panel".

3. Double-click the "Network and Sharing Center" icon.

4. Click "Change adapter settings".

5. Double-click "Local Area Connection".

6. Select "Internet Protocol Version 4 (TCP/IPv4)" and click "Proper-

ties".

7. Select "Use the following IP address" and then click the "OK" button

twice to save the configuration. For example, the default IP address of the

WDAP-C7210E is 192.168.1.253 and the router is 192.168.1.254. You may

choose from 192.168.1.1 to 192.168.1.252.

Table of Contents