E+E Elektronik EE741 User Manual page 27

Measuring mode
Status
Measurand 1
Measurand 2
Measurand 3
Measurand 4
Measurand 5
Measurand 6
Fig. 24 Display - menu navigation
Setup Mode Description
Output 1 Configuration for output 1:
Analogue or switch output, measurand, scale and switch setup.
Output 2 Configuration for output 2:
Switch or pulse output, measurand, switch setup.
Pipe diameter Set the pipe diameter (see chapter 3.1.1 Changing the Pipe Diameter).
Display Set the measuring mode and the display orientation.
Process parameter Set the operating pressure and the standard conditions (see chapter 3.2.1 General).
Low-flow cut-off
Set the cut-off threshold for leak flow volume suppression (see chapter 3.2.1 General).
Counter reading
Display or reset the consumption meter.
Min / Max Display or delete the min / max memory.
Settings Language (English / German)
Averaging of analogue output signal. Number of samples selectable between 1 and 50. The
sampling interval is 0.1 s.
E.g. < 10 .... response time t
Fig. 25 Display - menu items
Setup mode
Output 1
Output 2
Pipe diameter
DNxx
Display
Process param.
Low-flow cut-off
Counter reading
Min/Max
Settings
<2 s
90
50 .... response time t 5 s
90
User Manual EE741
Inline Flow Sensor for Compressed Air and Gases | 27